Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

XenonStrobe PY X-S-05 24V DC [grey] AMB

5J 1Hz IP66 18-30vDC EN 54-23 Certified

Varenr:
21510804055
21510804055 Pfannenberg 21510804055 XenonStrobe PY X-S-05 24V DC [grey] AMB 5J 1Hz IP66 18-30vDC EN 54-23 Certified
21510804055 Pfannenberg 21510804055 XenonStrobe PY X-S-05 24V DC [grey] AMB 5J 1Hz IP66 18-30vDC EN 54-23 Certified

PY X-S-05 PYRA Compact Flashing Light 5 J
EN 54-23 Certified
 
The compact flashing light is not only adaptable to many applications, but it is also impressive due to its safe and simple mounting.

• Installation options with external lugs or internal holes
• Simple electrical connection on the bottom of the casing
• Impact-proof lens
• Suitable for panel mounting
• Housing colours: red, grey or white
• Optional with Soft-Start-Module for reduction of starting current
• Modular design: housing can be easily stacked side-by side
 
Flash rate: 1 Hz = 60 flashes/min.
Flash energy: 5 J
Light intensity (DIN 5037): 1 44 cd (max. 55 cd)
Lens colours: clear, white, yellow, amber, red, green, blue
Operating temperature: - 40 °C ... + 55 °C
Storage temperature: - 40 °C ... + 70 °C
Relative humidity: max. 90%
Protection system according to EN 60529: IP 66
Protection class: II
Duty cycle: 100%
Service life of the flash tube: light emission still 70% after 8,000,000 flashes
Lens material: polycarbonate (PC)
Housing material: PC / ABS blend
Colour housing: similar to RAL 3000 (flame red) / RAL 7035 (light grey) / RAL 9003 (signal white)
Cable entry: 3 x M20 knock-outs on side, 1 knock-out on back
Integrated seal with cable entry: 6 – 13 mm (feed-through grommet)
Connecting terminals: 2.5 mm2 fine wire with cable end sleeve, AWG 16
Weight:
AC 165 g
DC 200 g
 
Conformity to standards
The visual characteristics of flashing lights conform to the European standard DIN EN 842: “Machine safety - visual alarm signals“.
Requirements contained in the DIN EN 981 standard: “Machine safety - system of acoustic and visual alarm and information signals“, can be fulfilled.
The colours ‘red’ for the emergency signal and ‘yellow’ for the warning signal conform to the requirements of IEC 73 / DIN EN 60073 / VDE 0199:
“Coding of display devices and control elements using colours and supplementary means“.
References to visual alarm devices can be found in the following standards:
EN 60825-1 Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837
DIN EN 54 Fire alarm systems
DIN 54113-2 Radiation protection regulations for the technical operation of X-ray equipment up to 500 kV
 


Copyright © 2024 Marin Supply. All rights reserved.
Forretningssystem og nettbutikkløsning levert av Multicase™ Norge AS
(4.21.3.82)