AL100H Alarm Horn Sounder & LED Beacon

The AL100H features the 104dB(A) A100 alarm horn sounder combined with the L101H high output L.E.D. beacon. The compact, robust housing is ideal for all general signalling applications including fire, security and process control.

The array of 24 Superflux type high output L.E.D's generates over 120 candela of light output and can be user set to either steady of flashing mode. Sounder & beacon may be connected from a single supply for simultaneous operation or from separate supplies for independent operation.

Features

•  High output L.E.D array
•  Automatic synchronisation on multi-sounder system.
•  Continuously rated.
•  Stainless steel fixings.
•  Unit can be mounted using external lugs or internal BESA compatible fixing positions.
•  Duplicate cable terminations (in & out for daisy-chain installations).
•  Tropicalisation available on request.
•  Available with custom tone configurations and frequencies.
•  ‘Programmable’ version available:
     - 45 alarm tones
     - 4 remotely selectable stages
     - Any tone can be assigned to any stage
     - User configurable continuous frequency tone

Approvals
Alarm sounder (A100): VdS approved to EN54-3 (CPD 89/106/EEC).
GOST-R approved. Cert: POCC GB-JB05-H00144
UL & cULs approved: General signalling use.

Specification

Sounder:
Maximum output: 104dB(A) @ 1 metre [95dB(A) @ 10ft/3m]
Nominal output: 100dB(A) @ 1m +/- 3dB - Tone 2 [91dB(A) @ 10ft/3m]
No. of tones: 32 (UKOOA / PFEER compliant)
No. of stages: 3
Volume control: Max. 100dB(A); Min. 90dB(A) - Tone 2
Effective range: 32m/105ft @ 1KHz
Stage switching: Negative - Reverse polarity stage switching on DC units.

Beacon:
Light source: High intensity L.E.D. array.
24 x Superflux type high ouput L.E.D’s
Options: Steady or 2Hz flash mode
(on board selection)
Peak/Effective Intensity cd: Green L.E.D: 176cd - measured ref. to I.E.S.
Terminals: 0.5 to 4.0mm² cables
L.E.D. colours: Amber Blue, Green, Red and White
Lens colour: All L.E.D. colours use a Clear lens to maximise output and to ensure the signal is most effective in high ambient light.

General: 
Voltages DC: 24V dc (10-30V dc); 48V dc (35-60V dc)
Voltages AC: 115V ac; 230V ac
Ingress protection: IP66
Housing material: High impact UL94 V0 & 5VA FR ABS
Colour: Red (RAL3000), grey (RAL7038) & white.
Cable entries: 4 x M20 clearance gland entries in side & back
Terminals: 0.5 to 1.5mm² cables.
Operating temp: -25 to +55°C [-13° to +131°F]
Storage temp: -40 to +70°C [-40° to +158°F]
Relative humidity: 90% at 20° [68°]
Weight: DC: 0.46kg/1.01Ibs AC:0.57kg/1.25Ibs

 
*Candela measurements representative of performance with clear lens at optimum voltage.
*SPL data +/-3dB(A). Measured at optimum voltage.