HA105N - Hootronic - Electronic Siren, Buzzer, Hooter & Bell
Applications and users that have traditionally demanded conventional electromechanical hooters, sirens, buzzers and bells can now choose the next generation alternative.
The technology employed in the Hootronic range features the latest in amplifier and digital to analogue conversion technology. The E2S Hootronic series of products faithfully reproduce the sounds made by legacy electro-mechanical signalling devices but in a modern, reliable and cost effective way.
With output levels of up to 112dB(A) at 1 metre the HA105N surpasses legacy electro-mechanical devices in performance
and effectiveness, it is also continuously rated, requires zero maintenance and the signal quality will not degrade with age.
PRODUCT SPECIFICATIONS:
Nominal Voltage: 230vAC (50-60Hz) +/-10%
Current Consumption: 75mA (current at nominal voltage)
Nominal Output: 112dB(A) @ 1m +/- 3dB - Tone 3
Volume Control: Max 112dB(A); Min 103dB(A) Approx
Ingress Protection: IP66
Effective Range: 60 meter @ 1KHz
Number of Tones: 5
Number of Stages: 3
Housing Colour: Grey (RAL7038)
Housing Material: High Impact UL94 VO & 5VA FR ABS
Cable entries: 2 x M20 clearance gland knockouts in side & back
Terminals: 0.5 to 4.0mm² cables.
Operating temp.: -25 to +55°C
Storage temp.: -40 to +70°C
Relative humidity: 90% at 20°C.
Weight : 1,0 kg
FEATURES:
The products in the Hootronic range have 5 user selectable ‘traditional’ sounds including:
• Tone 1 : Industrial Hooter (103dB(A) @ 1m)
• Tone 2 : High Frequency Mechanical Siren (112dB(A) @ 1m)
• Tone 3 : Medium Frequency Mechanical Siren (107dB(A) @ 1m)
• Tone 4 : Electro Mechanical Buzzer (108dB(A) @ 1m)
• Tone 5 : Mechanical Bell (98dB(A) @ 1m)
Each of these sounds have two additional, remotely selectable, alarm stages.
Remote switch generates genuine ‘tail off’ to sound when alarm is terminated.
The Hootronic sounder has the facility to replicate the ‘tail off’ traditionally associated with these tone when generated by electromechanical devices. The switching is achieved by cabling into the terminals marked STOP and ‘C/-’. The user can remotely activate and de-activate the sounder by switching the connection between STOP and the ‘C/-’ cables whilst the unit is powered. To achieve the ‘tail off’ sound at switch off, the unit must remain powered.
• Automatic synchronisation on multi-sounder system.
• Continuously rated.
• Stainless steel fixings.
• Unit can be mounted using external lugs or internal BESA compatible fixing positions.
• Duplicate cable terminations (in & out for daisy-chain installations).
• Tropicalisation available on request.
• GOST-R certificate: POCC GB.JB05.B02205