10292
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

Ex Cond.Gl. A2LCFBF/050NPT/NP/16/050NPT

IP66&IP68@50m-7days Exd-Exe-Ex nR

Varenr:
A2LCFBF050NPTNP16050
A2LCFBF050NPTNP16050 Peppers A2LCFBF/050/NP/16050 Ex Cond.Gl. A2LCFBF/050NPT/NP/16/050NPT IP66&IP68@50m-7days Exd-Exe-Ex nR
A2LCFBF050NPTNP16050 Peppers A2LCFBF/050/NP/16050 Ex Cond.Gl. A2LCFBF/050NPT/NP/16/050NPT IP66&IP68@50m-7days Exd-Exe-Ex nR
Lenker: | GA | ATEX | DataSheet | Manual | IECEx
.

Cable Gland Type A2LCFBF - Single Compression Conduit Gland
 
Ex-d; Ex-e; Ex-nR; Ex-tD; A21; IP66; IP68

“A*LCF” type glands, certified Flameproof Ex d, Increased Safety Ex e & Restricted Breathing Ex nR are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. They provide a controlled pull resistant environmental displacement seal on the cable outer sheath, minimising damage to cables that exhibit “cold flow” characteristics.
The gland maintains IP66 & IP68 to 25 metres and is deluge proof without the use of an additional seal or deluge boot. It is supplied with an IP O-ring seal as standard on metric entry threads. The gland features a female conduit connection thread as standard with an option for a male connection thread.

 
Compliance Standard: EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 61241-0, EN 61241-1, IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1 & IEC 60529
 
 
Certification:
ATEX: II 2 GD Ex d IIC / Ex e II / Ex tD A21 / II 3 GD Ex nR II
IECEx: Ex d IIC / Ex e II / Ex tD A21
GOST-R: Ex d IICU / Ex e IIU
CSA: Ex d IIC / Ex e II, Class I Zone 1; Class I Division 2, Groups A, B, C & D; Class II Division 2, Groups E, F & G; Class III, Enclosure Types 3, 4 & 4X
NEPSI: Ex d IIC / Ex e II
INMETRO: BR - Ex d IIC / Ex e II / Ex nR II / Ex tD A21
ABS: 1-1-4/7.7, 4.8-3/1.7, 4-8-3/13 and 4-8-4/27.5; MODU Rules 4-3-3/9
LLOYD’S: Enclosure Systems (Part 1B)
RMRS: Part XI of Rules for sea-going ships (ed.2008)

 
Certificate No.
ATEX: SIRA 01ATEX1272X & SIRA 09ATEX1221X
IECEx: SIR 07.0096X
GOST-R: ???? GB.??06.?00853
CSA: CSA 1356011
NEPSI: GYJ06186X
INMETRO: NCC 5879/09 X
ABS: 09-LD463991-PDA
LLOYD’S: 10/00056
RMRS: 09.00784.011

 
IP Rating: IP66 & IP68 (25 metres - 30 minutes), NEMA 4X & DTS01 1991
Operating Temperature: Neoprene Seals -20ºC to +85ºC; Silicone Seals -60ºC to +180ºC
Materials: Brass, Stainless Steel or Aluminium
Plating: Nickel - Zinc
 
 
Example Part Numbering A2LCFBF050NPT/NP/20/M20
(See below for details)
A: Type of gland featuring controlled displacement sealing
2: Neoprene Seals (2) - Silicone (3)
L: Peppers Lightweight Design
CF: Female Conduit Connection Thread (CF) / Male Thread Option (CM)
B: Brass (B) / Stainless Steel (S) / Aluminium (A)
F: Multiple Certification
050NPT: 1/2”NPT Female Conduit Connection Thread
NP: Nickel Plated (NP) - Zinc Plated (ZP)
20: Gland shell size
M20: M20 x 1.5 Entry Thread
Optional Accessories:
Locknut: Brass (ACBLN) / Stainless Steel (ACSLN)
Earth tag: Brass (ACBET) / Stainless Steel (ACSET)
IP Washers: Nylon (ACNSW) / Fibre (ACFSW)
Serrated Washers: Stainless Steel (ACSSW)
 
 
Notes:
* Gland size does not necessarily equate to the entry thread size. Gland size 16 is also available with an M16 x 1.5 entry thread.
* The IP O-ring seal is only available on metric entry threads. IP washers can be supplied for tapered entry threads.
* Please ensure that the IP O-ring is not used in conjunction with a flat IP washer.
* Dimensions (A) & (B) may differ for glands with non metric entry threads. Please refer to our “Thread Reference Tables” for specific dimensions.
* Where glands are fitted into non-metallic Ex e enclosures they must be included within the earth circuit of the system.
* The user should seek expert advice if intending to combine flammable and combustible dust in one environment/installation.
* Assembly instructions must be read prior to installation and adhered to in full.
* Peppers supplies cable glands with parallel entry threads that conform to the flameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standards. They usually incorporate a thread run out according to the available machining techniques and will not have a full form thread for the entire length. Peppers will not be held responsible for clients’ installations where this has not been taken into account.
* To maintain the specified IP rating, clearance holes must be in accordance with EN 50262 Table 1 and the entry device should be suitably secured.


Copyright © 2024 Marin Supply. All rights reserved.
Forretningssystem og nettbutikkløsning levert av Multicase™ Norge AS
(4.21.3.82)