Point Helideck Surface Mounted Perimeter Light PRL-EX-(LSM) LED v4 CLASS I, DIVISION 2 & ZONE 2
type PRL-97004-1C-G-EX-(LSM)
LED 220V Green Surface mounted perimeter light; 148mm height
CAP 437; UL 1598A marine vessels
Includes Marine Treatment
Delivered as fixture less the LSM Base :
The PRL-EX-LSM is an 8-inch diameter surface mounted light less than 6-inches high used for metal helidecks or existing pavement heliports on the FATO perimeter.
The lens and optical assembly are sealed mechanically without the use of chemical sealants.
Silicone-filled wire connectors are included. Standard with our marine treatment finish and ground lug.
Part Numbering Explanation for this model:
Part number: PRL-97004-2C-G-EX-(LSM)
PRL: Type
97004: Series
2: Voltage: 220VAC
C: Array: CAP 437 (The PRL v4 C array is 7.4 watts at 120-220V)
G: Color: Green
EX: CLASS I, DIVISION 2 & ZONE 2
LSM: Mounting: Surface Mount (see detail H14 under links above)
(Delivered without LSM base)
Compliances:
ETL Listed Class I, Division 2, Groups A B C D, T6 at -40 deg C to +55 deg C
ETL Listed Class I, Zone 2, Groups lIA, llB+H2, lIC T6 at -40 deg C to +55 deg C
ETL Listed to UL 844 & UL 1598
ETL Listed to UL 1598A Marine Vessels at -40 deg C to +55 deg C
ETL Listed to CSA C22.2 No. 137-Ml 981 & No. 250.0-08 Canada
FAA AC 150/5390-213 Heliport Design Guide
Registered ISO 9001:2008
ICAO Annex 14, Volume II
UK CAA CAP 437 & Transport Canada TP14371, AGA 7.17
IMO 2009 MODU Code (2010) paragraph 1 3.5.20
American Bureau of Shipping (ABS) Type Approved Product
ABS Green Passport per MEPC1 79(59)
Note: Array H brightness exceeds ICAO Annex 14
* For NVG tactical use only: PRL-97704-1 N-IR-LSM-MT
**For use with visible (non-111) array; adds I LEDs.
The Marine Treatment finish is used for all marine, high salt content air and other corrosive environments.
The fixture shall be treated for marine conditions by cleaning per US Depaitment of Defense 7T-C-490 method 114 pretreated with chrome-free aluminum conversion coating per US MIL-C-5541 type II, epoxy powder base coat primer and glossy polyester powder coat finish in co/or RAL 6003 (FED-S7D-595 color #14097) dark green. Powder coating per US Department of Defense MIL-PRF-24712A type VI and oven cured All external hardware is grade 316(A4) stainless steel.
Metal castings are copper-free (<0.25%) heat treated aluminum.