PHB-37001-C-2-M-MT
LED ICAO Heliport Identification Beacon
Lens color: Clear/White
Voltage: 220-240V, 50/60 Hz
With Morse Code (ICAO) Flash Control (Standard flashing H)
MT Marine Treatment (housing finish colour RAL 6003 - olive green)
Intensity: 2,000 candelas
Wattage: 70.2 watts Peak (AC & DC)
52,5 watts Average (AC & DC)
Volt-Amps: 110.4 VA (120V AC only)
Input Range: 93 to 144 volts (120V unit)
176 to 264 volts (220V unit)
Temp Rating: ± 55°C
Ingress Protection: IP66
Dimensions: 15 (381) x 1 (381) x 12 (304) H
Inches (mm)
Weight:: 41 lbs 18.6 kg
Mounting: 4 Holes on 13,25-inch circle
Compliances:
ETL Listed to UL 1 598 & UL 1598A Marine Vessels
ETL Listed to CSA C22.2 No.250.0-04 Canada
ETL Verified FAA L-864 to FAA Advisory Circular 150/5345-43F
Registered ISO 9001:2008
FAA Advisory Circular 150/5390-2 B, para. 21 0.f, 31 Oh, 41 Of.
ICAO Annex 14 Heliports, Volume II, para. 5.3.2. 1 to 5
ICAO Annex 14 Aerodromes, Volume I, para. 5.3.3.3 to 14
Army TM 5-811-5, para. 7-5b. Station Identification
Class I, Division 2, Groups A B C D, T6 (option—EX)
Class I, Zone 2, Groups IIA llB+H2 ilC, T6 (option —EX)
American Bureau of Shipping (ABS) Type Approved Product
The PHB LED medium intensity identification beacon PATENT PENDING) is specified to mark the heliport or airport location. All castings are aluminum, all hardware is stainless steel and the lens is glass. There is no plastic. All exterior metal beacon parts are powdercoat painted aviation yellow for corrosion resistance that meets the US Military Standard Salt Fog Test conducted per MIL-STD-810E, Method 509,3, Procedure I.
FEATURES:
- Over voltage & over current protection
- Short circuit & open circuit protection
- Metal oxide varistor surge protection
- No external plastic parts
- Modular components for servicing
- Replaceable LED array sections (5)
SPECIFICATION
The PHB POINTSPEC- series LED heliport identification beacon (PATENT PENDING) shall be listed Suitable for Use in Wet Locations to UL1 598A Marine Vessels, UL1 598 2nd Edition Luminaries; CSA C222 No.2500-04, 2nd Edition. Sealed to IP66 ingress protection.
The high intensity LED arrays shall be replaceable and fitted with plug-in connectors. All hardware shall be stainless steel. All exterior aluminum cast beacon parts shall be powdercoat painted aviation yellow for corrosion resistance that meets the US Military Standard Salt Fog Test conducted per MIL-STD-810E, Method 5093, Procedure I. The clear lens shall be made of strong soda-lime glass manufactured by Kopp Glass. There shall be no plastics used in the structural construction of the beacon.
OPTIONS:
OPTION —M:
The Morse Code beacon shall comply with ICAO Annex 14, Volume II, paragraph 5.3.2. The basic unit shall flash message "H" unless the user specifies a different message to be factory programmed. The peak beam in white shall be 2,500 candelas. For specific national requirements, the beacon color maybe green.
OPTION —MA:
In addition to the features of option —M, the Morse Code beacon shall have an external NEMA 4X control unit displaying LED array failure alarm and flasher failure alarm. An ON-OFF-AUTO switch on the door may be used with an FAA photoelectric controller (ordered separately) in the AUTO position.
OPTION —H:
The 3-color heliport beacon shall flash alternately white (clear), yellow, green at the FAA specified flash rate of 36 flashes per minute. The beacon is low intensity at 2,500 candelas in white intended for use at privately owned heliports where an optional visual aid is desired to enhance marking the heliport site location as noted in FAA Advisory Circular 150/5390-213, paragraph 21 0.f (2004).
Flash rate: 36 per minute Each color flashes 12 times per minute
OPTION —HA:
The 2-color heliport beacon shall flash alternately white (clear) and green or yellow at the FAA specified flash rate of 24 flashes per minute. The beacon is low intensity at 2,500 candelas in white intended for use at privately owned airports and heliports where an optional visual aid is desired to enhance marking the site location.
Flash rate: 24 per minute Each color flashes 12 times per minute
OPTION —DP:
The flash of the white (clear) LEDs shall be double-peaked (meaning a double flash) as appears in US Military specifications.
OPTION —MT:
The beacon shall be treated for marine conditions by cleaning per US MIL method Ill of TT-C-490, chromate priming per US MIL-C-5541, epoxy powder base coat and glossy polyester powdercoat finish coat in color RAIL 6003 (FED-STD-595 color #14097) green. Oven cured per US MIL-PRF-24712A.