ESSX15140

Stainless Steel 1.4404 (BS EN 10088-1 1995) SSX 1.5.
Size: 306x306x140mm (Finish: Standard)
IP Rating: IP68.
Certification Level: ATEX, IECEX, UKCA - Ex eb Apparatus certified (Suitable for use in Zone 1/21 Areas).
Temperature Rating: T6/T5.
Ambient Temperature (Degrees C): -50 to +40 and -50 to +55.
Entries: 
Side C: M20 Boss x 8, M25 Boss x 1
Terminals: (24 x WDU2.5WEGR) WDU 2.5 Wemid Beige
Terminal (1020000000)
End Plates: (1 x WAP2.5-10WEGR) WAP 2.5-10 Wemid Beige
End Plate (1050000000)
End Stops: (2 x EW35) EW 35 Wemid Beige End Stop (0383560000)
Numbering: (1-24) 
Mounted on: 1off TS35UNSL Rail TS35x7.5 Unslotted Galv.
Steel 2M/ST/ZN (0383400000)
Stud: 1 x EEAESM10SS
Enclosure Earth Stud Welded M10
Stainless Steel Side B Enclosure Earth Bar: Quantity 1, Orientation same as Rails, Position right(bottom) with 24 x TKACZB4 Clamps (2 x EAEB10X3B) 
Stud: 1 x EADESM6SSDoor Earth Stud M6 Stainless Steel  External Hinges:   position: Default.  

Other Items: 
4 x TKACSH1 (SH 1 Rail Support (0299860000)). 
1 x EATRN30X75GR (Trunking Narrow Slot 30w x 75h Grey (metres)). 
1 x EAGSBLSX15 (Solid Silicone Blue Lid Gasket for IP68 SX1.5). 
8 x EABM20SS (Boss M20 Female 316 Stainless Steel ABT16439). 
1 x EABM25SS (Boss M25 Female 316 Stainless Steel ABT16439). 
9 x EASXBOSSFIT (SX Boss fitment).

12 x Earth Clamps to be Mounted on Each Earth Bar

Entries via Welded Boss

Bolted Down Enclosure Lid

Enclosure is IP68 

Submerged in Salt Water for a 2 Months at a Depth of 10meters. 

Deviations: Cable Gland not Included onto the Quote

Note 1: Abtech designate the orientation of enclosures in a clockwise manner, Side A = Top, Side B = Right Hand Side, Side C = Bottom and Side D = Left Hand Side

Note 2: Unless specified otherwise all machining tolerance shall be class ‘m’ to BS EN 22768-1:1993, except for circular cable gland entries in junction boxes where the tolerance shall be +/- 0.25mm for hole sizes and +/- 2.0mm for hole positions. Where such entry positions are not specified they will be located at our discretion.

Note 3: Where the quotation is for hazardous area certified product please refer to the attached detailed specification sheet; in particular the permitted areas of use.

Note 4: Where applicable, stated delivery period commences upon receipt of final approved drawings.

Note 5: Unless otherwise stated, carriage and packing charges are based upon a single delivery. If you decide to receive goods on multiple deliveries we reserve the right to levy additional carriage charges.

Note-6: Delivery is an approximation based on available capacity at time of quote. Firm delivery dates will be confirmed upon order confirmation.

Note 7: Whilst we make every effort to correctly interpret your requirements, please be aware that it is your responsibility to ensure that the quoted items are checked for suitability against your original enquiry. Orders subsequently received which reference this quotation, will be treated as an order for the items quoted above and not for the items detailed in your original enquiry.

Note 9: Unless specified on the quotation, Abtech enclosures and control stations are supplied without internal wiring between terminals, operators and contact blocks or to any additional components that may be installed.

Note 10: Due to extreme variation in raw material costs of stainless steel, GRP and plastics; combined with rising fuel surcharges for freight, the prices quoted cannot be assured out with the validity period. Abtech also reserves the right to amend pricing of any valid quotes if raw material prices increase by more than 5% within a 14-day period (relevant market price indexes available upon request)