7126
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

SS Enclosure ESSX66 Exe 152x152x102mm

IP68 NON- ATEX

Varenr:
ESSX66.53555-0
ESSX66.53555-0 Abtech  SS Enclosure ESSX66 Exe 152x152x102mm IP68 NON- ATEX
ESSX66.53555-0 Abtech  SS Enclosure ESSX66 Exe 152x152x102mm IP68 NON- ATEX

ESSX66.53555-0

Stainless Steel 1.4404 (BS EN 10088-1 1995) SSX 66.
Size: 152x152x102mm (Finish: Orbital)
IP Rating: IP68.  

Entries:
Side A: M20 BOSS x 1
Side B: M20 BOSS x 1
Side D: M20 BOSS x 1

Enclosure Earth Stud: 1 x EEAESM6SS Side B
Door Earth Stud: 1 x EADESM6SS
Abtech Gel Label (1 x LABTGELCS)

Other Items:
3 x EABM20SS (Boss M20 Stainless Steel ABT16439).

SOLID RUBBER GASKET
REINFORCEMENT NOT SUPPLIED BY ABTECH IN THIS SITUATION AS ENCLOSURE TO BE FILLED WITH GEL BY THE SUPPLIER.
ENTRY VIA WELDED BOSSES
IP68 DEPTH OF 50M FOR 10 YEARS

 

Note 1: Unless specified otherwise all machining tolerance shall be class ‘m’ to BS EN 22768-1:1993, except for circular cable gland entries in junction boxes where the tolerance shall be +/- 0.25mm for hole sizes and +/- 2.0mm for hole positions. Where such entry positions are not specified they will be located at our discretion.
Note 2: Where the quotation is for hazardous area certified product please refer to the attached detailed specification sheet; in particular the permitted areas of use.
Note 3: Where applicable, stated delivery period commences upon receipt of final approved drawings.
Note 4: Unless otherwise stated, carriage and packing charges are based upon a single delivery. If you decide to receive goods on multiple deliveries we reserve the right to levy additional carriage charges.
Note 5: Whilst we make every effort to correctly interpret your requirements, please be aware that it is your responsibility to ensure that the quoted items are checked for suitability against your original enquiry. Orders subsequently received which reference this quotation, will be treated as an order for the items quoted above and not for the items detailed in your original enquiry.
Note 6: Please note that our minimum order charge is £100.00 (excluding carriage & packing and VAT).



Copyright © 2019 Marin Supply. All rights reserved.
Forretningssystem og netthandel er levert av MultiCase™ Norge AS
(3.18.8.132)