10058
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

GRP Carbon BPGC13 255x250x120mm

P66&IP67 No predrilled entries/1 term.

Varenr:
EBPGC12-Q2019/80745
EBPGC12-Q2019/80745 Abtech EBPGC12 GRP Carbon BPGC13 255x250x120mm P66&IP67 No predrilled entries/1 term.
EBPGC12-Q2019/80745 Abtech EBPGC12 GRP Carbon BPGC13 255x250x120mm P66&IP67 No predrilled entries/1 term.
Lenker: | DataSheet

EBPGC13

Spec: Q2019/ABTECH/80745-0/K

EBPGC12
GRP Carbon BPGC 12. Black Carbon Loaded RAL9005.
Size: 255x250x120mm (Finish: Standard) IP Rating: IP67.
Certification Level: ATEX and IECEX - Ex e Apparatus certified (Suitable for use in Zone 1/21 Areas).
Temperature Rating: T6/T5.
  
Ambient Temperature (Degrees C): -50 to +40 and -50 to +55.
Terminals: (1 x WDU2.5WEGR) WDU 2.5 Wemid Beige Terminal (1020000000)
End Plates: (1 x WAP2.5-10WEGR) WAP 2.5-10 Wemid Beige End Plate (1050000000)
End Stops: (2 x EW35) EW 35 Poly Beige End Stop (0383560000)
Mounted on: 1off TS35UNSL Rail TS35x7.5 Unslotted Galv. Steel 2M/ST/ZN (0383400000)

        

Notes:

  • Note 1: Unless specified otherwise all machining tolerance shall be class ‘m’ to BS EN 22768-1:1993, except for circular cable gland entries in junction boxes where the tolerance shall be +/- 0.25mm for hole sizes and +/- 2.0mm for hole positions. Where such entry positions are not specified they will be located at our discretion.
  • Note 2: Where the quotation is for hazardous area certified product please refer to the attached detailed specification sheet; in particular the permitted areas of use.
  • Note 3: Where applicable, stated delivery period commences upon receipt of final approved drawings.
  • Note 4: Unless otherwise stated, carriage and packing charges are based upon a single delivery. If you decide to receive goods on multiple deliveries we reserve the right to levy additional carriage charges.
  • Note-5: Delivery is an approximation based on available capacity at time of quote. Firm delivery dates will be confirmed upon order confirmation.
  • Note 6: Whilst we make every effort to correctly interpret your requirements, please be aware that it is your responsibility to ensure that the quoted items are checked for suitability against your original enquiry. Orders subsequently received which reference this quotation, will be treated as an order for the items quoted above and not for the items detailed in your original enquiry.
  • Note 7: Please note that our minimum order charge is £200.00 (excluding carriage & packing and VAT).
  • Note 8: Unless specified on the quotation, Abtech enclosures and control stations are supplied without internal wiring between terminals, operators and contact blocks or to any additional components that may be installed.


Copyright © 2019 Marin Supply. All rights reserved.
Forretningssystem og netthandel er levert av MultiCase™ Norge AS
(3.18.8.132)