9957
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

GRP Box EBPG13 GREY 400x250x120mm

IP66/67 Ex-e Apparatus certified

Varenr:
EBPG13G-Q78446-0
EBPG13G-Q78446-0 Abtech GRP BPG 13 GRP Box EBPG13 GREY 400x250x120mm IP66/67 Ex-e Apparatus certified
EBPG13G-Q78446-0 Abtech GRP BPG 13 GRP Box EBPG13 GREY 400x250x120mm IP66/67 Ex-e Apparatus certified
Lenker: | DataSheet
EBPG13GREY
    
GRP BPG 13. Grey RAL7001.
Size: 400x250x120mm
Finish: Standard
IP Rating: IP66/67
Certification Level: ATEX and IECEX - Ex e Apparatus certified
Suitable for use in Zone 1/21 Areas.
Temperature Rating: T6/T5.
Ambient Temperature (Degrees C): -50 to +40 and -50 to +55.
Terminals: (20 x WDU6WEGR) WDU 6 Wemid Grey
Terminal (1020200000)
End Plates: (1 x WAP2.5-10WEGR) WAP 2.5-10 Wemid
Beige End Plate (1050000000)
End Stops: (2 x EW35) EW 35 Poly Beige End Stop (0383560000)
Numbering: (1--20)
Mounted on: 1off TS35UNSL Rail TS35x7.5 Unslotted Galv. Steel 2M/ST/ZN (0383400000)
      
 
Note 1: Unless specified otherwise all machining tolerance shall be class ‘m’ to BS EN 22768-1:1993, except for circular cable gland entries in junction boxes where the tolerance shall be +/- 0.25mm for hole sizes and +/- 2.0mm for hole positions. Where such entry positions are not specified they will be located at our discretion.
Note 2: Where the quotation is for hazardous area certified product please refer to the attached detailed specification sheet; in particular the permitted areas of use.
Note 3: Where applicable, stated delivery period commences upon receipt of final approved drawings.
Note 4: Unless otherwise stated, carriage and packing charges are based upon a single delivery. If you decide to receive goods on multiple deliveries we reserve the right to levy additional carriage charges.
Note-5: Delivery is an approximation based on available capacity at time of quote. Firm delivery dates will be confirmed upon order confirmation.
Note 6: Whilst we make every effort to correctly interpret your requirements, please be aware that it is your responsibility to ensure that the quoted items are checked for suitability against your original enquiry. Orders subsequently received which reference this quotation, will be treated as an order for the items quoted above and not for the items detailed in your original enquiry.
Note 7: Please note that our minimum order charge is NOK. 2.000,- (excluding carriage & packing and VAT).
Note 8: Unless specified on the quotation, Abtech enclosures and control stations are supplied without internal wiring between terminals, operators and contact blocks or to any additional components that may be installed.
   
Estimated Dispatch: 4-5 Weeks
Drawings: If required - NOK.1.500,- per drawing (NOK 500,- per revision)


Copyright © 2019 Marin Supply. All rights reserved.
Forretningssystem og netthandel er levert av MultiCase™ Norge AS
(3.18.8.132)