6801
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

Industrial Cable Gland A2LB/16/M20 Brass

IP66 & IP68@35m Oø 4,0-8,4 mm

Varenr:
A2LB16M20
A2LB16M20 Peppers A2LB/16/M20 Industrial Cable Gland A2LB/16/M20 Brass IP66 & IP68@35m Oø 4,0-8,4 mm
A2LB16M20 Peppers A2LB/16/M20 Industrial Cable Gland A2LB/16/M20 Brass IP66 & IP68@35m Oø 4,0-8,4 mm
Lenker: | DataSheet
.

Cable Gland Type A - (Single seal Gland designed for use with Unarmoured Cable)
 
 

IEC 62444 : EN 62444 : BS 6121 : IP66 : IP68

  
 
 
“A” type glands are commonly referred to as “stuffing glands”. They provide a controlled, pull resistant environmental displacement seal on the cable outer sheath, minimising damage to cables that exhibit “cold flow” characteristics.
 
The gland maintains IP66 & IP68 to 50 metres. Options are available for use with LSOH cables and extreme temperature applications.
 
   
Compliance Standard:IEC 62444; EN 62444; BS 6121
   
Certification:ABS Specified ABS Rules
    
Certificate No.:ABS 14-LD463991-1-PDA
   
IP Rating:IP66 & IP68 (50 metres - 7 Days )
   
Operating Temperature:Neoprene Seals -35ºC to +90ºC
Silicone Seals -60ºC to +180ºC
   
Materials:Brass, Stainless Steel or Aluminium
   
Plating:Electroless Nickel
  
  
 
 
 

Cable Gland Selection Table:

 
GlandEntryThreadCableNominalDim.Weight
SizeThreadLengthAcceptanceProtrusionAcrossKgs.
Size[B]Range [D] Length [L]Corners [A]
     
12M12 x 1.5  16  0.9 - 6.0    33  21.00.038
12M16 x 1.5  16  0.9 - 6.0    33  28.00.068
12M20 x 1.5  16  0.9 - 6.0    33  28.00.082
16M16 x 1.5  16  4.0 - 8.4    33  28.00.097
16M20 x 1.5  16  4.0 - 8.4    33  28.00.104
20SM20 x 1.5  16  7.2 - 11.7    33  28.00.102
20M20 x 1.5  16  9.4 - 14.0    33  33.00.127
25M25 x 1.5  1613.5 - 20.0    33  41.40.166
32M32 x 1.5  1619.5 - 26.3    33  50.60.244
40M40 x 1.5  1623.0 - 32.2    37  60.50.396
50SM50 x 1.5  1628.1 - 38.2    37  71.50.558
50M50 x 1.5  1633.1 - 44.1    37  71.50.438
63SM63 x 1.5  1939.2 - 50.1    37  88.00.832
63M63 x 1.5  1946.7 - 56.0    37  88.00.664
75SM75 x 1.5  1952.1 - 62.0    37  99.00.924
75M75 x 1.5  1958.0 - 68.0    37  99.00.714
80M80 x 2  2562.2 - 72.0    50115.21.514
85M85 x 2  2569.0 - 78.0    50115.21.332
90M90 x 2  2574.0 - 84.0    50125.71.622
100M100 x 2  2582.0 - 90.0    50125.71.523

 
Alterativ Gland Size and Entry Thread Size in NPT:
 
Gland Size    Entry Thread Size NPT
  
   120375 NPT (3/8”) or 050 NPT (1/2”)
   16050 NPT (1/2”) or 075 NPT (3/4”)
   20S050 NPT (1/2”) or 075 NPT (3/4”)
   20050 NPT (1/2”) or 075 NPT (3/4”)
   25075 NPT (3/4”) or 100 NPT (1”)
   32100 NPT (1”) or 125 NPT (1 1/4”)
   40125 NPT (1 1/4”) or 150 NPT (1 1/2”)
   50S150 NPT (1 1/2”) or 200 NPT (2”)
   50200 NPT (2”)
   63S200 NPT (2”) or 250 NPT (2 1/2”)
   63250 NPT (2 1/2”)
   75S250 NPT (2 1/2”) or 300 NPT (3”)
   75300 NPT (3”)
   80300 NPT (3”) or 350 NPT (3 1/2”)
   85300 NPT (3”) or 350 NPT (3 1/2”)
   90350 NPT (3 1/2”) or 400 NPT (4”)
100350 NPT (3 1/2”) or 400 NPT (4”)
 
 
  1
Part Numbers:      A   2  L  B
  3  S
  4  A
 
 
Example Part Numbering:  A 2 L B / N P / 2 0 / M20
(See below for details)
 
AType of gland featuring controlled displacement
sealing
2(2) Neoprene Seals (-35ºC to +90ºC)
(3) Silicone Seals (-60ºC to +180ºC)
(1) Neoprene/Lead
(4) Silicone/Lead
LPeppers Standard Designation
B(B) Brass
(S) Stainless Steel
(A) Aluminium
  
Options:C(C) PVC Shroud
Options:(P) PCP Shroud
Options:(3) Silicone LSOH Shroud
Options:K, V or H (K) Locknut & Nylon, (V) Fibre IP Washer
or (H) PTFE IP Washer
Options:TIncluding Earth Tag
Options:SIncluding Serrated Washer
Options:1Quantity per kit
Options:NP(NP) Nickel Plated or (ZP) Zinc Plated
  
20Gland shell size
M20M20 x 1.5mm Male Entry Thread
 
 
 Optional Accessories:
 
Locknut:Brass (A C B L N)
Brass Nickel Plated (A C B L N / N P)
Stainless Steel (A C S L N)
Aluminium  (A C A L N)
  
Earth tag:Brass (A C B E T)
Brass Nickel Plated (A C B E T / N P)
Stainless Steel (A C S E T)
Aluminium (A C A E T)
   
IP Washers:Nylon (A C N S W) (-40° to +95°C)
Fibre (A C F S W) (-40° to +135°C)
PTFE (A C P S W) (-200° to +260°C)
(see note 3 below)
  
Serrated Washers:Stainless Steel (A C S S W)
  
Shrouds:PVC (A C S P V C)  (-25° to +70°C)
PCP (A C S P C P) (-30° to +100°C)
LSOH (A C S S I O) (-60° to +200°C)
 

Notes:

     
Gland size does not necessarily equate to the entry thread size.
Dimensions (A) & (B) may differ for glands with non metric entry
threads. Please refer to our “Thread Reference Tables” for specific
dimensions.
Assembly instructions must be read prior to installation and adhered
to in full.
Peppers supplies cable glands with parallel entry threads that
conform to the flameproof threaded joint requirements of IEC/EN
60079-1 and other equivalent standards. They usually incorporate a
thread run out according to the available machining techniques and
will not have a full form thread for the entire length.
Peppers Cable Glands Limited will not be held responsible for
clients’ installations where this has not been taken into account.
When selecting IP Washer & Shroud material for use with glands,
please be aware of the accessories temperature range to ensure they
are suitable for the intended installation.
   

 

 
For further details, please refer to the attached Datasheet, Assembly Instructions (Manual), Certificates and other relevant documents.

 


Copyright © 2021 Marin Supply. All rights reserved.
Forretningssystem og nettbutikkløsning levert av Multicase™ Norge AS
(4.21.3.82)