2001261
7441
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
Totalt antall treff:
|
Antall artikler funnet:
|
Handlevogn
Handlevognen er tom.
GRP Carbon EBPGC14 Ex-e 600x250x120mm
P66&IP67 No predrilled entries
Varenr:
EBPGC14.Q60452-B-i1
|
|
EBPGC14
Spec: Q60452-B/AB/item 1
GRP Carbon BPGC 14
Black Carbon Loaded RAL9005
Size: 600x250x120mm (Finish: Standard)
IP Rating: IP66/67
Certification Level: ATEX and IECEX - Ex e Apparatus certified (Suitable for use in Zone 1/21 Areas)
Temperature Rating: T6/T5
Ambient Temperature (Degrees C): -50 to +40 and -50 to +55.
Terminals (1 x SAK2.5KRGBG)
End Plates (2 x APSAK2.5KRGBG)
End Stops (1 x EWK1)
Numbering (1--1)
Mounted on 1off TS32UNSL rail
Abtech Gel Label (1 x LABTGELWS)
Entries: No predrilled entries
Note 1: Unless specified otherwise all machining tolerance shall be class ‘m’ to BS EN 22768-1:1993, except for circular cable gland entries in junction boxes where the tolerance shall be +/- 0.25mm for hole sizes and +/- 2.0mm for hole positions. Where such entry positions are not specified they will be located at our discretion.
Note 2: Where the quotation is for hazardous area certified product please refer to the attached detailed specification sheet; in particular the permitted areas of use.
Note 3: Where applicable, stated delivery period commences upon receipt of final approved drawings.
Note 4: Unless otherwise stated, carriage and packing charges are based upon a single delivery. If you decide to receive goods on multiple deliveries we reserve the right to levy additional carriage charges.
Note 5: Whilst we make every effort to correctly interpret your requirements, please be aware that it is your responsibility to ensure that the quoted items are checked for suitability against your original enquiry. Orders subsequently received which reference this quotation, will be treated as an order for the items quoted above and not for the items detailed in your original enquiry.
Note 6: Please note that our minimum order charge is £200.00 (excluding carriage & packing and VAT).
Delivery: 4 weeks