Flashing Light Quadro S-M-Flex - 13 Joules

 

Proven tunnel safety light. Conforms to the guideline of the Swiss Federal Highways Authority: ‘Signaling systems of safety devices in tunnels’
• Synchronised flashing of up to 10 beacons in series with no additional controller
• Initial current limited to below 1 A
• Integrated function monitoring with fault message contact
• Variable brightness and flash frequency settings on-site on the device
• Use of double-pole terminal for the simple connection of parallel operated lights

 

 

Electrical data
Rated voltage: 230 VAC
Rated frequency: 50/60Hz
Operating range: 195–253 VAC
Nominal current consumption: 250mA (@ 1Hz/13Joule)
Initial current limited to: <1A/10ms
Alarm output: 230VAC/80mA

 

 

Mechanical data
Flash rate: adjustable (1Hz = 60 flashes/min. factory setting)
Flash energy: max. 13 J
Light intensity (DIN 5037): 140 cd (with a clear lens)
Lens colours: red, amber, yellow, green, blue, white, clear
Operating temperature: -25°C to +55°C
Storage temperature: -40°C to +70°C
Relative humidity: 100%
Ingress Protection (EN60529): IP66 & IP67
Impact resistance (as per EN50102): IK 08
Protection class: II
Duty cycle: 100%
Service life of the flash tube: light emission still 70% after 12,000,000 fl ashes
Material, lens: Polycarbonate (PC)
Material, housing:  Polycarbonate (PC), RAL 7035
Housing colour:  Light Grey RAL7035
Connecting terminal: cage clamp terminal 0.08 - 2.5 mm2
Cable entry (prepared): 2 x M20 x 1.5 sideways
Mounting external lugs: 113 x 153 mm – M5 or 127.1 x 127.1 mm – M5
Mounting internal holes: 113 x 113 mm
Weight: 600 g