LED-X Single Directional LED module - Extreemly Powerfull

 

Introduction:

The Exterior LED modules are weatherproof LED based warning light modules that contain state-of-the-art high intensity LEDs. These products provide eight different operation modes including a steady-burn mode. These products may be adapted to a variety of exterior applications such as motorcycle applications, OEM fire truck, grill light and back-deck applications. The exterior LED is available in either a +12V or a +24V version.

 

Features and Specifications:
Operating Voltage: 10-16Vdc (+12V version), 22-30Vdc (+24V version),

Reverse Polarity Protection.

50% Duty Cycle unless otherwise stated.
Flash Rate: 70 fpm minimum

Flash Modes (Flashing version only):
1. Cycle-Flash: Cycles through Triple, Quad, Double, and Fast Single modes at approximately 109 fpm.
2. Triple-Flash: Three consecutive pulses per flash at approxmately 83 fpm.
3. Quad-Flash: Four consecutive pulses per flash at approximately 77 fpm.
4. Double-Flash: Two consecutive pulses per flash at approximately 78 fpm.
5. Single-Flash: Single flash pattern at 75 fpm.
6. Quad-Flash 70% Duty Cycle: Can be used for NFPA.
7. Steady-burn: Continuous ON-state operation.

Flashing Current Draw: 0,25A Avg.
Steady Burn Current Draw: 0,5A Avg.

Available colors - Red, Amber or Blue or any combination for dual modules.
Available configurations - Single or dual light heads, Amber, Red, or Blue.

 

Important Notice: Before installation, read the manual.

 

WARNING: The white wire should NOT be connected to a positive voltage under any circumstances.

This Product contains high intensity LED devices. To prevent eye damage, DO NOT stare into light beam at close range.