AL121AXX Appello X Recordable Sounder & Xenon Beacon
The AL121AXX Appello X is the next generation of user recordable alarm sounder, capable of storing up to 2 minutes of content, combined with a Xenon strobe. The AL121AXX records, stores and plays back with unsurpassed clarity, user defined voice messages, music or sounds stored directly to non-volatile memory without any intermediate analogue to digital conversion.
Low current consumption and CD quality reproduction in a robust fire retardant Type 4/4X/3R/13, IP66 housing ensure the AL121AXX Appello X is suitable for all general signalling applications including fire, security and process control.
Features:
The AL121AXX Appello user recordable unit enables the recording of any type of content such as voice or music that can be played back at CD quality output at SPL’s of up to 112dB(A) at 1 metre. This content can be reproduced repeatedly, alternating with or without one of the built-in 45 alarm tones. The alarm tone notification has an output of up to 126dB(A) at 1 metre.
For multiple unit installations the recording process is only required once to create a master unit which can then be used to program all other AL105NAX units on the system, guaranteeing synchronisation during playback, using the supplied ‘Synch’ cable.
• Direct content storage on non-volatile memory.
• CD quality reproduction.
• Message length: 4 x 30 seconds
• Easy message creation with built in microphone or line-in audio input.
• Volume controls for user content and alarm tones.
• Available with custom tone configurations and frequencies.
• 5J Xenon strobe beacon capable of 200cd*.
• Factory programming of user supplied content also available.
• UL approved for general signalling use.
Approvals:
• UL & cULs approved: General signalling use
• EAC approved (GOST-R)
Specification:
| Alarm sounder: | |
| | |
| Voice output: | 111dB(A) @ 1 metre |
| Music output: | 112dB(A) @ 1 metre |
| Alarm output: | 126dB(A) @ 1 metre |
| Alarm tones: | x 45 (UKOOA/PFEER compliant) |
| Messages: | x 4 (30 seconds each) |
| Controls: | Independent volume controls for |
| user content and alarm tones |
| Effective range: | 300m/984ft @ 1KHz |
| | |
| Xenon beacon: | |
| | |
| Energy: | 5 Joules (5Ws) |
| Flash rate: | 1Hz (60 fpm) |
| Peak Candela: | 86,935 cd |
| Candela: | 200 cd* (effective intensity) |
| | |
| General: | |
| | |
| Ingress protection: | Type 4 / 4X / 3R / 13, IP66 |
| Rating: | Continuous |
| Housing material: | UL94V0 & 5VA FR ABS |
| Housing colour: | RAL3000 Red, RAL7038 Grey and White |
| Fixings: | Stainless Steel |
| Cable entries: | 2 x M20 clearance gland entries. |
| Custom configurations also available. |
| Terminals: | 0.5 to 2.5mm² |
| Operating temp: | -25° to +55°C [-13° to +131°F] |
| Storage temp: | -40° to +70°C [-40° to +158°F] |
| Relative humidity: | 90% at 20°C [68°F] |
| Weight: | DC: 1.00kg/2.2Ibs AC: 1.20kg/2.64Ibs |
| | |
* Candela measurements representative of performance with clear lens at optimum voltage.
* SPL data +/-3dB(A). Measured at optimum voltage.
Current Consumption:
| Version: | Voltage: | Range: | Current: |
| | | | |
| Alarm+Xenon | 24vDC | 20-28vDC | 1.76A* |
| Alarm+Xenon | 115vAC | +/-10% | 602mA* |
| 50/60Hz | | |
| Alarm+Xenon | 230vAC | +/-10% | 552mA* |
| 50/60Hz | | |
| | | | |
* current at nominal voltage on Tone 1
Part Codes:
| Version: | Voltage: | Part code: |
| | | |
| Alarm+Xenon | 24vDC | AL121 AXX DC024 [x] . [y] - UL |
| Alarm+Xenon | 115vAC | AL121 AXX AC115 [x] . [y] - UL |
| Alarm+Xenon | 230vAC | AL121 AXX AC230 [x] . [y] - UL |
| | | |
| Housing colour: [x] | R | RAL3000 Red (standard) |
| G | RAL7038 Grey |
| W | White |
| | | |
| Xenon Lens colour: [y] | .1 | R: Red |
| .2 | A: Amber |
| .3 | Y: Yellow |
| .4 | G: Green |
| .5 | B: Blue |
| .7 | C: Clear |
| .8 | M: Magenta |
| | | |
Suffix part number with ‘-UL’ for UL approved version