2001105
7633
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
|
Totalt antall treff:
|
|
Antall artikler funnet:
|
Handlevogn
Handlevognen er tom.
Sealing O ring for GNEx B1
GNEx B1 Spare Part
|
|
SP75-1011 Sealing O ring for GNEx B1
for all GNEx B1 X05, IECEx & ATEX approved explosion proof 5 Joule Xenon beacons.
Maintenance, repair and overhaul of the equipment should only be carried out by suitably qualified personnel in accordance with the current relevant standards:
- EN60079-19/IEC60079-19 Explosive atmospheres - Equipment repair, overhaul and reclamation
- EN60079-17/IEC60079-17 Explosive atmospheres - Electrical installations inspection and maintenance
Units must not be opened while an explosive atmosphere is present.
Electrostatic charging hazard - Clean only with a damp cloth.
The enclosure is non-conducting and may generate an ignition-capable level of electrostatic charges under certain extreme conditions.
The user should ensure that the equipment is not installed in a location where it may be subjected to external conditions that might cause a build-up of electrostatic charges on non-conducting surfaces.
The stainless steel beacon guard is not earthed and may generate an ignition-capable level of electrostatic charges. It has a capacitance of 10pF according to EN/IEC60079-0, clause 7.5.
The flashdome guard must not be removed from the unit at any time whilst in service.