8278
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

XenonStrobe X400-22-02 230vAC RED

IP65 10/7,5 Joule (single/double flash)

Varenr:
X400230AC22.1
X400230AC22.1 Moflash X400-22-02 XenonStrobe X400-22-02  230vAC RED IP65 10/7,5 Joule (single/double flash)
X400230AC22.1 Moflash X400-22-02 XenonStrobe X400-22-02  230vAC RED IP65 10/7,5 Joule (single/double flash)
Lenker: | DataSheet | Manual

X400 Industrial Xenon Beacons
 
Product overview:
The X401/400 DIN Base Series utilises a discharge capacitor and converter circuit to ignite xenon gas inside a tube, resulting with a flash of light. Xenon gas ignites virtually instantaneously so maximum brightness is obtained immediately. Xenons have an added advantage of low current consumption combined with a reasonable life span. The X401/400 Series provides a 360 degree light ouput and has a Single Flash or Double Flash option. The Double Flash option extends the signal duration making it more noticeable to the human eye. Brightness is increased by the use of a Dioptric (Fresnel) lens which magnifies the light output.This series also incorporates both bottom and side entry cabling access and mounting is achieved via external three point fixing.
 
 
Features:
Continuously rated
Suitable for surface or wall mounting
Single or double flash option
M20 side or bottom cable entry
Optional wall bracket & protective guard available - see accessory page
360° visibility
IP65
 
 
PRODUCT SPECIFICATIONS:
Nominal Voltage:       230VAC
Current Consumption: 0,06 Amp)
Flashes per min.:         60 FPM (Single Flash) / 90 FPM (Double Flash)
Ingress protection:      IP65
Housing material:         UV Stable Black ABS Plastic Base
Lense material:            UV Stable Polycarbonate Lens
Cable entries:               2 x M20 (side and bottom)
Operating temperature: -25°C...+55°C
Weight:                        0,82 kg


Copyright © 2024 Marin Supply. All rights reserved.
Forretningssystem og nettbutikkløsning levert av Multicase™ Norge AS
(4.21.3.82)