2000036
7652
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
|
Totalt antall treff:
|
|
Antall artikler funnet:
|
Handlevogn
Handlevognen er tom.
Combi Xenon HMCA112-05 24vDC [g] RED
122dB(A) IP66&IP67 5T 20-28vDC
|
|
HMCA112-05 Hootronic - Electronic Siren, Buzzer, Claxon & Bell
Applications and users that have traditionally demanded conventional electromechanical claxons, sirens, buzzers and bells can now choose the next generation alternative.
The E2S Hootronic series of products faithfully reproduce the sounds made by legacy electro-mechanical signalling devices but in a modern, reliable and cost effective way.
With output levels of up to 122dB(A) at 1 metre the HMCA112-05 surpasses legacy electro-mechanical devices in performance and effectiveness, it is also continuously rated, requires zero maintenance and the signal quality will not degrade with age.
The products in the Hootronic range have 5 user selectable ‘traditional’ sounds including:
- Tone 1 : Industrial Claxon
- Tone 2 : High Frequency Mechanical Siren
- Tone 3 : Medium Frequency Mechanical Siren
- Tone 4 : Electro Mechanical Buzzer
- Tone 5 : Mechanical Bell
Each of these sounds have two additional, remotely selectable, alarm stages.
Remote switch generates genuine ‘tail off’ to sound when alarm is terminated.
- Automatic synchronisation on multi-sounder system.
- Continuously rated.
- Large termination area.
- Stainless steel fixings.
- Ratchet adjustable stainless steel ‘U’ bracket for 360° positioning.
- Duplicate cable terminations (in & out for daisy-chain installations).
- Tropicalisation available on request.
| Specification | |
| | |
| Hootronic Sounder: | |
| Nominal output: | 122dB(A) @ 1m +/- 3dB [113dB(A) @ 10ft/3m] |
| No. of tones: | 5 |
| No. of stages: | 3 |
| Volume control: | Max. 122dB(A); Min. 113dB(A) approx. |
| | |
| Beacon: | |
| Energy: | 5 Joules (5Ws) |
| Flash rate: | 1Hz (60 fpm) |
| Peak Candela: | 500,000 cd - calculated from energy (J) |
| Effective Intensity cd: | 250 cd - calculated from energy (J) |
| Peak Candela: | 16,428 cd* - measured ref. to I.E.S. |
| Effective Intensity cd: | 51 cd* - measured ref. to I.E.S. |
| Lens colours: | Red, Yellow, Amber, Green, Blue & Clear |
| Tube life: | Emissions are reduced to 70% |
| after 8 million flashes |
| | |
| General: | |
| Voltages DC: | 12vDC; 24vDC |
| Voltages AC: | 115vAC; 230vAC |
| Ingress protection: | IP66 & IP67 (Third party tested) |
| Housing material: | High impact UL94 V0 & 5VA FR ABS |
| Colour: | Grey (RAL7038) |
| Cable entries: | 2 x M20 supplied with 1 blanking plug |
| Lens material: | Borosilicate glass dome with |
| PC prismatic lens cover. |
| Guard: | Stainless Steel dome guard as standard |
| Terminals: | 0.5 to 4.0mm² cables. |
| Operating temp: | -25 to +55°C [-13° to +131°F] |
| Storage temp: | -40 to +70°C [-40° to +158°F] |
| Relative humidity: | 90% at 20°C [68°F] |
| Weight: | DC: 3.00kg / 6.6Ibs AC: 3.50kg / 7.7Ibs |
*Candela measurements representative of performance with clear lens at optimum voltage.
*SPL data +/-3dB(A). Measured at optimum voltage.
| Part Codes | |
| | |
| Version: | Part code: |
| 12vDC | HMCA11205DC12G-xx |
| 24vDC | HMCA11205DC24G-xx |
| 115vAC | HMCA11205AC115G-xx |
| 230vAC | HMCA11205AC230G-xx |
| [xx] = Lens colour: | RD: Red, AM: Amber, YW: Yellow |
| GN: Green, BL: Blue, CL: Clear |
| Alarm sounder | | | |
| | | | |
| Version: | | Voltage: | Current: |
| 24vDC | | 10-30vDC | 375mA* |
| 115vAC | 50/60Hz | +/-10% | 160mA |
| 230vAC | 50/60Hz | +/-10% | 75mA |
| | | | |
| Xenon beacon | | | |
| | | | |
| Version: | | Voltage: | Current: |
| 12vDC | | 10-14V | 550mA |
| 24vDC | | 20-28V | 300mA |
| 115vAC | 50/60Hz | +/-10% | 140mA |
| 230vAC | 50/60Hz | +/-10% | 55mA |
* current at nominal voltage
Tone Table
| Stage 1 | WAV file | Frequency Description | Stg 2 | Stg 3 |
| T 1 | | Industrial Claxon | T 3 | T 5 |
| T 2 | | High Frequency Mechanical Siren | T 1 | T 5 |
| T 3 | | Medium Frequency Mechanical Siren | T 1 | T 5 |
| T 4 | | Electro Mechanical Buzzer | T 2 | T 5 |
| T 5 | | Mechanical Bell | T 1 | T 2 |
Country specific or custom tone configurations and alarm frequencies are available upon request.