10003
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

Combi DL112X 24vDC [red] BLUE

112dB(A) 5J IP66 45T 20-28vdc

Varenr:
DL112XDC024RB
DL112XDC024RB E2S DL112XDC024R/B Combi DL112X 24vDC [red] BLUE 112dB(A) 5J IP66 45T 20-28vdc
DL112XDC024RB E2S DL112XDC024R/B Combi DL112X 24vDC [red] BLUE 112dB(A) 5J IP66 45T 20-28vdc
Lenker: | DataSheet | Manual | Decl. | GA-drawing

DL112X Alarm Sounder & Xenon Beacon

The DL112X is a high output, 119dB(A) alarm sounder with integrated Xenon beacon.
Low current consumption and high SPL in a robust IP66 housing ensure the DL112X is suitable for all general signalling applications including fire, security and process control. The corrosion proof, marine grade aluminium die cast enclosure is phosphated and powder coated providing resilence in the harshest of industrial environments.

Specification

Sounder:
Maximum output: 119dB(A) @ 1 metre [110dB(A) @ 10ft/3m]
Nominal output: 112dB(A) @ 1m +/- 3dB - Tone 2 [103dB(A) @ 10ft/3m]
No. of tones: 45 (UKOOA / PFEER compliant)
No. of stages: 3
Volume control: Max. 112dB(A); Min. 100dB(A) - Tone 2
Effective range: 125m/410ft @ 1KHz
Stage switching: Negative
Reverse polarity stage switching on DC units.

Beacon:
Energy: 5 Joules (5Ws)
Flash rate: 1Hz (60 fpm)
Peak Candela: 500,000 cd - calculated from energy (J)
Effective Intensity cd: 250 cd - calculated from energy (J)
Peak Candela: 86,935 cd* - measured ref. to I.E.S.
Effective Intensity cd: 200 cd* - measured ref. to I.E.S.
Lens colours: Amber, Blue, Clear, Green, Red & Yellow
Tube life: Emissions are reduced to 70% after 8 million flashes

General:
Voltages DC: 12Vdc; 24V dc; 48V dc [24V dc units can use 24V ac for single stage applications].
Voltages AC: 24V ac; 115V ac; 230V ac
Ingress protection: IP66, Type 4 / 4X / 3R
Housing material: Marine grade aluminium A1 Si12 Cu
Colour: Red (RAL3000), grey (RAL7038)
Cable entries: 2 x M20 x 1.5mm threaded gland entries supplied with one stoppoing plug
Terminals: 0.5 to 4.0mm² cables.
Operating temp: -25 to +55°C [-13° to +131°F]
Storage temp: -40 to +70°C [-40° to +158°F]
Relative humidity: 90% at 20°C [68°F]
Weight: DC: 2.80kg/6.16Ibs AC:3.10kg/6.82Ibs

*Candela measurements representative of performance with clear lens at optimum voltage.
*SPL data +/-3dB(A). Measured at optimum voltage.


Part Codes

Version: Part code:

12V dc   DL112XDC012[x]/[y]
24V dc   DL112XDC024[x]/[y]
48V dc   DL112XDC048[x]/[y]
24V ac   DL112XAC024[x]/[y]
115V ac  DL112XAC115[x]/[y]
230V ac  DL112XAC230[x]/[y]

[x] = Housing colour: G: Grey R: Red
[y] - Lens colour: A: Amber, B: Blue, C: Clear, G: Green, R: Red, Y: Yellow
 
Suffix part number with ‘-P’ for programmable, 4 stage, 45 tone version (not available with UL approval).
Suffix part number with ‘-UL’ for UL approved version.

Alarm sounder

Version: Voltage: Current:

12V dc ?  10-30V dc  200mA*
24V dc ?  10-30V dc  200mA*
48V dc ?  35-60V dc  120mA*
24V ac   50/60Hz +/-10%  500mA
115V ac  50/60Hz +/-10%  100mA
230V ac  50/60Hz +/-10%  60mA
 
* current at nominal voltage on Tone 2

Xenon beacon

Version: Voltage: Current:

12V dc   10-14V dc  380mA
24V dc   20-28V dc  250mA
48V dc   42-54V dc  175mA
24V ac 50/60Hz  +/-10%   300mA
115V ac 50/60Hz +/-10%   70mA
230V ac 50/60Hz +/-10%   35mA



Copyright © 2019 Marin Supply. All rights reserved.
Forretningssystem og netthandel er levert av MultiCase™ Norge AS
(3.18.8.132)