10173
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

Combi AL112N X-F-M 24vDC [red] CLEAR MED

119dB(A) 5J IP66 45T MED-Certified

Varenr:
AL112NXDC024R/C-F-M
AL112NXDC024R/C-F-M E2S AL112NXDC024R/C-MED Combi AL112N X-F-M 24vDC [red] CLEAR MED 119dB(A) 5J IP66 45T MED-Certified
AL112NXDC024R/C-F-M E2S AL112NXDC024R/C-MED Combi AL112N X-F-M 24vDC [red] CLEAR MED 119dB(A) 5J IP66 45T MED-Certified
Lenker: | MED | EC-CoC | MED-D | Manual | GA | DataSheet
AL112NX Alarm Sounder & Xenon Beacon with forward facing beacon 
 
The AL112NX features the 119dB(A) A112N alarm sounder combined with the L101X Xenon beacon. The compact, robust housing is ideal for all general signalling applications including fire, security and process control.
The 5 Joule Xenon strobe generates over 200 candela of light output. DC versions have multile flash rates selectable during installation. Sounder & beacon may be connected from a single supply for simultaneous operation or from separate supplies for independent operation.
 
Features:
• Automatic synchronisation on multi-sounder system.
• High output Xenon beacon
• DC voltage units feature multiple flash rates.
• Continuously rated.
• Stainless steel fixings.
• Unit can be mounted using external lugs or internal BESA compatible fixing positions.
• Duplicate cable terminations (in & out for daisy-chain installations).
• Tropicalisation available on request.
• Available with custom tone configurations and frequencies.
• ‘Programmable’ version available:
- 45 alarm tones
- 4 remotely selectable stages
- Any tone can be assigned to any stage
- User configurable continuous frequency tone
 
Approvals:
• A112N alarm sounder is VdS approved to EN54-3 (CPD 89/106/EEC).
• Xenon beacon (L101X) VdS approved to EN54-23:2010 (CPD 89/106/EEC).
• UKOOA/PFEER compliant alarm tones.
• UL approved version available.
• GOST-R approved. Cert: POCC GB-JB05-H0014
 
Specification:
 
Sounder:
Maximum output: 119dB(A) @ 1 metre
Nominal output: 112dB(A) @ 1m +/- 3dB - Tone 2
No. of tones: 45 (UKOOA / PFEER compliant)
No. of stages: 3
Volume control: Max. 112dB(A); Min. 100dB(A) - Tone 2
Effective range: 125m @ 1KHz
Voltages DC: 24V dc (10-30V dc); 48V dc (35-60V dc) [DC units can use 24V ac for single stage applications.]
Voltages AC: 24V ac; 115V ac; 230V ac
Stage switching: Negative
Reverse polarity stage switching on DC units.
 
Beacon:
Energy: 5 Joules (5Ws)
Flash rate: 1Hz (60 fpm)
Peak Candela: 500,000 cd - calc. from energy (J)
Effective candela: 250 cd - calc. from energy (J)
Peak candela: 86,935 cd* - measured ref. to I.E.S.
Effective candela: 200 cd* - measured ref. to I.E.S.
Lens colours: Amber, Blue, Clear, Green, Magenta, Red & Yellow
Tube life: Emissions are reduced to 70% after 8 million flashes
 
General:
Ingress protection: IP66
Housing material: High impact UL94 V0 & 5VA FR ABS
Colour: Red (RAL3000)
Cable entries: 2 x M20 clearance gland entries in side & back
Terminals: 0.5 to 4.0mm² cables.
Operating temp: -25 to +55°C
Storage temp: -40 to +70°C
Relative humidity: 90% at 20°C.
Weight : DC: 2.00kg AC:2.30kg
*Candela measurements representative of performance with clear lens at optimum voltage.
*SPL data +/-3dB(A). Measured at optimum voltage.
 
Part codes:
Version: Part code:
12V dc AL112NXDC012[x]/[y]
24V dc AL112NXDC024[x]/[y]
48V dc AL112NXDC048[x]/[y]
24V ac AL112NXAC024[x]/[y]
115V ac AL112NXAC115[x]/[y]
230V ac AL112NXAC230[x]/[y]
[x] = Housing colour: R: Red, G: Grey
[y] = Lens colour: A: Amber, B: Blue. C: Clear, G: Green, M: Magenta, R: Red, Y: Yellow
Suffix part number with ‘-P’ for programmable, 4 stage, 45 tone version.
Suffix part number with ‘-F’ for forward facing Xenon beacon.
Suffix part number with ‘-UL’ for UL approved version.
 
Alarm sounder:
Version: Voltage: Current:
12/24V dc 10-30V dc 200mA*
48V dc 35-60V dc 120mA*
24V ac 50/60Hz +/-10% 500mA
115V ac 50/60Hz +/-10% 100mA
230V ac 50/60Hz +/-10% 60mA
* current at nominal voltage on Tone 2
 
Xenon beacon:
Version: Voltage: Current:
12V dc 10-14V dc 500mA
24V dc 20-28V dc 250mA
48V dc 42-54V dc 175mA
24V ac 50/60Hz +/-10% 300mA
115V ac 50/60Hz +/-10% 70mA
230V ac 50/60Hz +/-10% 35mA


Copyright © 2019 Marin Supply. All rights reserved.
Forretningssystem og netthandel er levert av MultiCase™ Norge AS
(3.18.8.132)