8269
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

Combi SONFL1-H LED HO 24vDC [red] RED

105dB(A) Perm./Blink IP66 10T 10-30vDC

Varenr:
SONFL1HDC024R.1-H
SONFL1HDC024R.1-H E2S SONFL1HDC024R/R-H Combi SONFL1-H LED HO 24vDC [red] RED 105dB(A) Perm./Blink IP66 10T 10-30vDC
SONFL1HDC024R.1-H E2S SONFL1HDC024R/R-H Combi SONFL1-H LED HO 24vDC [red] RED 105dB(A) Perm./Blink IP66 10T 10-30vDC
Lenker: | GA | DataSheet | Manual | DoC
.

SONFL1H-HO Alarm Sounder & LED Beacon
 
 
The SONFL1H-HO features the 105dB(A) SONF1 alarm sounder combined with the L101H high output L.E.D. beacon. The compact, robust housing is ideal for all general signalling applications including fire, security and process control.
 
The array of 24 Superflux type high output L.E.D's generates over 120 candela of light output and can be user set to either steady of flashing mode. Sounder & beacon may be connected from a single supply for simultaneous operation or from separate supplies for independent operation.

•  High output L.E.D array
•  Automatic synchronisation on multi-sounder system.
•  Continuously rated.
•  Stainless steel fixings.
•  Mounting via internal BESA compatible fixing positions or via external mounting lugs.
•  Duplicate cable terminations (in & out for daisy-chain installations).
•  Tropicalisation available on request.
•  Available with custom tone configurations and frequencies.
 

Approvals
 
SONF1-HO sounder: VdS approved to EN54-3 (CPD 89/106/EEC).
GOST-R approved. Cert: POCC GB-JB05-H00144.
 
 
Specification

Sounder:
Maximum output: 105dB(A) @ 1 metre [96dB(A) @ 10ft/3m]
Nominal output: 103dB(A) @ 1m +/- 3dB - Tone 1 [94dB(A) @ 10ft/3m]
No. of tones: 10 (UKOOA / PFEER compliant)
No. of stages: 2
Volume control: On board potentiometer
Effective range: 30m/99ft @ 1KHz
 
 
Beacon:
Light source: High intensity L.E.D. array.
24 x Superflux type high ouput L.E.D’s
Options: Steady or 2Hz flash mode (on board selection)
Peak/Effective Intensity cd: Green L.E.D: 176cd - measured ref. to I.E.S.
Terminals: 0.5 to 4.0mm² cables
L.E.D. colours: Amber Blue, Green, Red and White
Lens colour: All L.E.D. colours use a Clear lens to maximise output and to ensure the signal is most effective in high ambient light.
 
 
General:
Voltages DC: 12Vdc; 24V dc
Ingress protection: IP66
Housing material: High impact UL94 V0 & 5VA FR ABS
Colour: Red (RAL3000), grey (RAL7038) & white.
Lens material: PC
Cable entries: 4 x M20 clearance gland knockouts in side & back
Terminals: 0.5 to 1.5mm² cables.
Operating temp: -25 to +55°C [-13° to +131°F]
Storage temp: -40 to +70°C [-40° to +158°F]
Relative humidity: 90% at 20°C [68°F]
Weight: 0.50kg/1.1Ibs
*SPL data +/-3dB(A). Measured at optimum voltage.
*Candela measurements representative of performance with clear lens at optimum voltage.
 


Copyright © 2024 Marin Supply. All rights reserved.
Forretningssystem og nettbutikkløsning levert av Multicase™ Norge AS
(4.21.3.82)