7293
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

Ex CallPoint IS-CP4A-BG-ST-NF-DL-RD-S2KR

IP66 II 1G Ex ia IIC T6 Ga

Varenr:
ISCP4ABGSTNFDLRDS2KR
ISCP4ABGSTNFDLRDS2KR E2S  Ex CallPoint IS-CP4A-BG-ST-NF-DL-RD-S2KR IP66 II 1G Ex ia IIC T6 Ga
ISCP4ABGSTNFDLRDS2KR E2S  Ex CallPoint IS-CP4A-BG-ST-NF-DL-RD-S2KR IP66 II 1G Ex ia IIC T6 Ga
Break Glass Call Point IS-CP4A-BG-ST-NF-DL-RD-S2KR
 
Type:                       BG (Break Glass)
Terminals:               ST (Standard Terminals)
Lift Flap:                 NF (No Flap)
Duty Label:             DL (Duty/Tag label: Metalised Polyester)
Colour:                    RD (Red Colour)
Series Resistor:        S2KR (Resistor value 2K) 
 
 
The IS-CP4A-BG and IS-CP4B-BG break glass manual call points are approved for Zones 0, 1, 2, 21 & 22 requiring intrinsically safe equipment for the control of fire and gas alarm systems. Available with and without monitoring resistors
all versions are certified to ATEX and IECEx standards.

The IS-CP4 range features enclosures manufactured from corrosion proof, marine grade, copper free LM6 (A413)
aluminium which is phosphated and powder coated.
 
 
Options:

• Alternative housing colours are available to meet specific requirements.
• DIN rail mounted terminal blocks: 8 x 2.5mm²
• Stainless Steel lift flap
• Metalised Polyester  Duty label.
• Series and/or End of Line resistors.
 

Approvals:

• ATEX certificate: SIRA 09ATEX2287X, IEC 60079-0:2007 Ed 5, EN 60079-11:2007, EN 60079-26:2007,  EN 61241-1:2004
• IECEx certificate: IECEx SIR 09.0122X, IEC 60079-0:2007-10 Edition: 5, IEC 60079-11:2006 Edition: 5, IEC 60079-26:2006 Edition: 2, IEC 61241-1:2004 Edition: 1
 
Specification:

IS-CP4A-BG:
II 1G Ex ia IIC T6 Ga
II 2D Ex t IIIC T60°C Db
IP66
IS-CP4B-BG:
II 1G Ex ia IIC T4 Ga
II 2D Ex t IIIC T70°C Db
IP66

Ambient: Ta = -40°C to +55°C
Ingress protection: IP66
Housing material: Marine grade copper free LM6 Aluminium
Housing finish: Phosphated & powder coated finish: anti-corrosion.
Colour: RAL3000 Red (others available on request)
Cable entries: 2 x M20 clearance top and 1 x M20 clearance side. Back box can be rotated to give 2 x bottom and 1 x side entries.
Stopping plugs: 2 x nylon plugs as standard. Brass and stainless steel plugs optional
Terminals: 6 x 4.0mm² cables.
 
 
 
 
 


Copyright © 2020 Marin Supply. All rights reserved.
Forretningssystem og netthandel er levert av MultiCase™ Norge AS
(3.18.8.132)