8203
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

Ex CallPoint GNExCP6B-PB-S-N-S-N-YW-24

ExxxR GRP IP66 II2G Exed mb IIC T4 Gb

Varenr:
GNExCP6B-PB-MS11231
GNExCP6B-PB-MS11231 E2S GNExCP6B-PB-MS11231 Ex CallPoint GNExCP6B-PB-S-N-S-N-YW-24 ExxxR GRP IP66 II2G Exed mb IIC T4 Gb
GNExCP6B-PB-MS11231 E2S GNExCP6B-PB-MS11231 Ex CallPoint GNExCP6B-PB-S-N-S-N-YW-24 ExxxR GRP IP66 II2G Exed mb IIC T4 Gb GNExCP6B-PB-MS11231 E2S GNExCP6B-PB-MS11231 Ex CallPoint GNExCP6B-PB-S-N-S-N-YW-24 ExxxR GRP IP66 II2G Exed mb IIC T4 Gb
GNExCP6B-PB-MS11231 E2S GNExCP6B-PB-MS11231 Ex CallPoint GNExCP6B-PB-S-N-S-N-YW-24 ExxxR GRP IP66 II2G Exed mb IIC T4 Gb
GNExCP6B-PB-MS11231 E2S GNExCP6B-PB-MS11231 Ex CallPoint GNExCP6B-PB-S-N-S-N-YW-24 ExxxR GRP IP66 II2G Exed mb IIC T4 Gb GNExCP6B-PB-MS11231 E2S GNExCP6B-PB-MS11231 Ex CallPoint GNExCP6B-PB-S-N-S-N-YW-24 ExxxR GRP IP66 II2G Exed mb IIC T4 Gb
Lenker: | IECEx | Manual | DataSheet | GA | DoC | ATEX
GNExCP6B-PB Push Button

 
Manual Call Point with EOL & series devices.
 
The GNExCP6B manual call points are available as break glass, push button or tool reset versions. They are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems.
 
All types are available with EOL or series resistors, diode or Zener diodes or an LED indicator and also with either single or double pole change over switches. All versions are certified to ATEX and IECEx standards..
 
 
Approvals
 
ATEX certificate: Sira 09ATEX3286X, IEC 60079-0:2007 Ed 5, EN 60079-1:2004, EN 60079-7:2007, IEC 60079-18:2009 Ed 3, EN 61241-1:2004

IECEx certificate: IECEx SIR 09.0121X, IEC 60079-0:2007-10 Edition: 5, IEC 60079-1:2003 Edition: 5, IEC 60079-18:2009 Edition: 3, IEC 60079-7:2006-07 Edition: 4, IEC 61241-1:2004 Edition: 1
 
 
Specification
 
GNExCP6B:II 2G Ex e d mb IIC T4 Gb
II 2D Ex t IIIC T80°C Db
IP66
  
Ambient:Ta = -40°C to +50°C [-40° to +131°F]
 
Ingress protection:IP66
 
Housing material:GRP - glass reinforced polyester
(UV stable)
 
Colour:RAL3000 Red (others available on request)
  
Cable entries:2 x M20 clearance top and
1 x M20 clearance side.
Back box can be rotated to give
2 x bottom and 1 x side entries.
  
Stopping plugs:2 x Ex e nylon plugs as standard
Brass and stainless steel plugs optional
 
Terminals:6 x 4.0mm² / 8 x 2.5mm² 
Weight:1.3Kg / 2.86Ibs
    
Note:For applications that do not require monitoring
resistors, diodes or inidcator LED’s please see
the GNExCP6A-PB version.
Data sheet reference: 1.3.05.
  
 
The GNExCP6B call point can contain a maximum of two resistor or diode E.O.L. or series modules. The LED indicator can be combined with an EOL resistor or diode. 
  
Part Code Structure
  
Example:GNExCP6B-PB [s] [m] [t] [d] [x] [v] [Exxx] [Sxxx]
GNExCP6B-PB -S -N -S -N -RD -24 -E470R-S10KR
    

 
 
Part Codes
  
Version:Part code:
 
Product type:GNExCP6B-PBB type - choice of end of line devices
 
Switch Type:[s]SSPCO
DDPCO
  
Stopping plugNNylon
material: [m]BBrass
PNickel Plated
SStainless Steel
 
Terminals:[t]SStandard 6 x 4mm²
DDIN Rail 8 x 2.5mm²
 
Duty label [d]:NNo duty label
PMetalised Polyester
S Stainless Steel
  
EnclosureRDRed
colour: [x]BLBlue
GNGreen
YWYellow
RWRed/White
YBYellow/Black
BKBlack
  
Voltage: [v]4848V System voltage
2424V System voltage
1212V System voltage
066V System voltage
   
E.O.L.Module:ExxxRResistor value in Ohms
[Exxx](e.g. E470R = 470 Ohm)
ED1Diode IN4007 = ED1
ExxxZZener diode (e.g. E5V1Z = 5.1V)
  
Series Module:SxxxRResistor value in Ohms
[Sxxx](e.g. S1K5R = 1.5K Ohm)
SD1Diode IN4007 = SD1
SxxxZZener diode e.g. S5V1Z = 5.1V
LEDLED = LED indicator
  


Options

  • Alternative housing colours are available to meet specific requirements.
  • Single or double pole c/o switch.
  • DIN rail mounted terminal blocks: 8 x 2.5mm².
  • Metalised polyester or stainless steel “Duty” label.
  • Series and/or End of Line resistors, diodes & Zener diodes
  • Indicator LED.
 
 
Versions
  
Resistors:Zener Diodes:
Diodes:
------------------------------------------------------------------
Max./Min.Max.ZenerMax.Max.Max.Max.
NominalResistorCurrentVoltage:InputCurrent:Voltage:Current:
Voltage:Value:(if Volt.:
resistor
is EOL
only):
------------------------------------------------------------------
56V/48V1K80.75A3.3V56Vdc230mA <56Vdc0.75A
28V/24V470R1.00A4.7V56Vdc162mA<50Vdc1.00A
15V/12V120R1.00A5.1V56Vdc149mA
9V/6V 47R1.00A5.6V56Vdc136mA
6.2V56Vdc122mA
6.8V56Vdc112mA
10V56Vdc76mA
12V56Vdc63mA
  

 If resistor is used in Series the Max. Current is not applicable.


Copyright © 2020 Marin Supply. All rights reserved.
Forretningssystem og netthandel er levert av MultiCase™ Norge AS
(3.18.8.132)