GNExCP6B-BG Break Glass
Manual Call Point with EOL & series devices.
The GNExCP6B manual call points are available as break glass, push button or tool reset versions. They are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems.
All types are available with EOL or series resistors, diode or Zener diodes or an LED indicator and also with either single or double pole change over switches. All versions are certified to ATEX and IECEx standards..
Approvals
ATEX certificate: Sira 09ATEX3286X, IEC 60079-0:2007 Ed 5, EN 60079-1:2004, EN 60079-7:2007, IEC 60079-18:2009 Ed 3, EN 61241-1:2004
IECEx certificate: IECEx SIR 09.0121X, IEC 60079-0:2007-10 Edition: 5, IEC 60079-1:2003 Edition: 5, IEC 60079-18:2009 Edition: 3, IEC 60079-7:2006-07 Edition: 4, IEC 61241-1:2004 Edition: 1
Specification
| GNExCP6B: | II 2G Ex e d mb IIC T4 Gb |
| II 2D Ex t IIIC T80°C Db |
| IP66 |
| | |
| Ambient: | Ta = -40°C to +50°C [-40° to +131°F] |
| | |
| Ingress protection: | IP66 |
| | |
| Housing material: | GRP - glass reinforced polyester |
| (UV stable) |
| | |
| Colour: | RAL3000 Red (others available on request) |
| | |
| Cable entries: | 2 x M20 clearance top and |
| 1 x M20 clearance side. |
| Back box can be rotated to give |
| 2 x bottom and 1 x side entries. |
| | |
| Stopping plugs: | 2 x Ex e nylon plugs as standard |
| Brass and stainless steel plugs optional |
| | |
| Terminals: | 6 x 4.0mm² / 8 x 2.5mm² |
| | |
| Test: | Test key facility |
| | |
| Weight: | 1.2Kg / 2.64Ibs |
| | |
| Note: | For applications that do not require monitoring |
| resistors, diodes or inidcator LED’s please see |
| the GNExCP6A-BG version. |
| Data sheet reference: 1.3.04. |
| | |
The GNExCP6B call point can contain a maximum of two resistor or diode E.O.L. or series modules. The LED indicator can be combined with an EOL?resistor or diode.
| | |
| Part Code Structure | |
| | |
| Example: | GNExCP6B-BG [s][m][t][l][d][x][v][Exxx][Sxxx] |
| GNExCP6B-BG-S-N-S-N-N-RD-24-E470R-S10KR |
| | |
| Part Codes | | |
| | | |
| Version: | Part code: | |
| | | |
| Product type: | GNExCP6B-BG | B type - choice of end of line devices |
| | | |
| Switch Type:[s] | S | SPCO |
| D | DPCO |
| | | |
| Stopping plug | N | Nylon |
| material: [m] | B | Brass |
| P | Nickel Plated |
| S | Stainless Steel |
| | | |
| Terminals:[t] | S | Standard 6 x 4mm² |
| D | DIN Rail 8 x 2.5mm² |
| | | |
| Lift flap: [l] | L | Lift flap |
| N | No lift flap |
| | | |
| Duty label [d]: | N | No duty label |
| P | Metalised Polyester |
| S | Stainless Steel |
| | | |
| Enclosure | RD | Red |
| colour: [x] | BL | Blue |
| GN | Green |
| YW | Yellow |
| RW | Red/White |
| YB | Yellow/Black |
| BK | Black |
| | | |
| Voltage: [v] | 48 | 48V System voltage |
| 24 | 24V System voltage |
| 12 | 12V System voltage |
| 06 | 6V System voltage |
| | | |
| E.O.L.Module: | ExxxR | Resistor value in Ohms |
| [Exxx] | | (e.g. E470R = 470 Ohm) |
| ED1 | Diode IN4007 = ED1 |
| ExxxZ | Zener diode (e.g. E5V1Z = 5.1V) |
| | | |
| Series Module: | SxxxR | Resistor value in Ohms |
| [Sxxx] | | (e.g. S1K5R = 1.5K Ohm) |
| SD1 | Diode IN4007 = SD1 |
| SxxxZ | Zener diode e.g. S5V1Z = 5.1V |
| LED | LED = LED indicator |
| | | |
Options
• Alternative housing colours are available to meet specific requirements.
• Single or double pole c/o switch.
• DIN rail mounted terminal blocks: 8 x 2.5mm².
• Metalised polyester or stainless steel “Duty” label.
• Series and/or End of Line resistors, diodes & Zener diodes
• Indicator LED.
| Versions | | | | | | | |
| | | | | | | | |
| Resistors: | | | Zener | | | Diodes: | |
| | | Diodes: | | | | |
| ---------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
| Max./ | Min. | Max. | Zener | Max. | Max. | Max. | Max. |
| Nominal | Resistor | Current | Voltage: | Input | Current: | Voltage: | Current: |
| Voltage: | Value: | (if | | Volt.: | | | |
| | resistor | | | | | |
| | is EOL | | | | | |
| | only): | | | | | |
| ---------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
| 56V/48V | 1K8 | 0.75A | 3.3V | 56Vdc | 230mA | <56Vdc | 0.75A |
| 28V/24V | 470R | 1.00A | 4.7V | 56Vdc | 162mA | <50Vdc | 1.00A |
| 15V/12V | 120R | 1.00A | 5.1V | 56Vdc | 149mA | | |
| 9V/6V | 47R | 1.00A | 5.6V | 56Vdc | 136mA | | |
| | | 6.2V | 56Vdc | 122mA | | |
| | | 6.8V | 56Vdc | 112mA | | |
| | | 10V | 56Vdc | 76mA | | |
| | | 12V | 56Vdc | 63mA | | |
| | | | | | | | |
If resistor is used in Series the Max. Current is not applicable.