GNExCP6B-BG-S-N-D-L-N-RD-24-ExxxR-SxxxR Break Glass Call Point - RED
Part code: GNExCP6B-BG-S-N-D-L-N-RD-24-ExxxR-SxxxR
Version: BG = Break Glass
Switch Type: S = Single Pole
Stopping Plugs: N = Nylon
Terminal Type: D = DIN Rail 8 x 2.5mm²
Lift Flap: L = Lift flap
Duty Label: N = No duty label
Body Colour: RD = Red
Nominal Voltage: 24 = 24v System voltage
E.O.L Module: ExxxR = (Resistor value to be specified)
Series Module: SxxxR = (Resistor value to be specified)
The GNExCP6B manual call points are available as break glass, push button or tool reset versions. They are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems. All types are available with EOL or series resistors, diode or Zener diodes or an LED indicator and also with either single or double pole change over witches. All versions are certified to ATEX and IECEx standards..
Specification:
GNExCP6B: II 2G Ex e d mb IIC T4 Gb
II 2D Ex t IIIC T80°C Db
IP66
Ambient: Ta = -40°C to +50°C
Ingress protection: IP66
Housing material: GRP - glass reinforced polyester (UV stable)
Colour: RAL3000 Red (others available on request)
Cable entries: 2 x M20 clearance top and
1 x M20 clearance side.
Back box can be rotated to give
2 x bottom and 1 x side entries.
Stopping plugs: 2 x Ex e nylon plugs as standard
Brass and stainless steel plugs optional
Terminals: 6 x 4.0mm² / 8 x 2.5mm²
Test: Test key facility (included in delivery)
Note:
For applications that do not require monitoring resistors,diodes or inidcator LED’s please see the GNExCP6A-BG version. Data sheet reference: 1.3.04.
Options:
• Alternative housing colours are available to meet specific requirements.
• Single or double pole c/o switch.
• DIN rail mounted terminal blocks: 8 x 2.5mm².
• Metalised polyester or stainless steel “Duty” label.
• Series and/or End of Line resistors, diodes & Zener diodes
• Indicator LED.
Approvals:
• ATEX certificate: Sira 09ATEX3286X, IEC 60079-0:2007 Ed 5, EN 60079-1:2004, EN 60079-7:2007, IEC 60079-18:2009 Ed 3, EN 61241-1:2004
• IECEx certificate: IECEx SIR 09.0121X, IEC 60079-0:2007-10 Edition: 5, IEC 60079-1:2003 Edition: 5, IEC 60079-18:2009 edition: 3, IEC 60079-7:2006-07 Edition: 4, IEC 61241-1:2004 Edition: 1