10104
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

Ex-z2 Combi D2xC1X05 [red] 24vDC CLEAR

112dB(A) /116dB(A) 5J IP66 Zone 2 & 22

Varenr:
D2xC1X05DC024AB1R.7
D2xC1X05DC024AB1R.7 E2S D2xC1X05DC024AB1R/C Ex-z2 Combi D2xC1X05 [red] 24vDC CLEAR 112dB(A) /116dB(A) 5J IP66 Zone 2 & 22
D2xC1X05DC024AB1R.7 E2S D2xC1X05DC024AB1R/C Ex-z2 Combi D2xC1X05 [red] 24vDC CLEAR 112dB(A) /116dB(A) 5J IP66 Zone 2 & 22 D2xC1X05DC024AB1R.7 E2S D2xC1X05DC024AB1R/C Ex-z2 Combi D2xC1X05 [red] 24vDC CLEAR 112dB(A) /116dB(A) 5J IP66 Zone 2 & 22
D2xC1X05DC024AB1R.7 E2S D2xC1X05DC024AB1R/C Ex-z2 Combi D2xC1X05 [red] 24vDC CLEAR 112dB(A) /116dB(A) 5J IP66 Zone 2 & 22
D2xC1X05DC024AB1R.7 E2S D2xC1X05DC024AB1R/C Ex-z2 Combi D2xC1X05 [red] 24vDC CLEAR 112dB(A) /116dB(A) 5J IP66 Zone 2 & 22 D2xC1X05DC024AB1R.7 E2S D2xC1X05DC024AB1R/C Ex-z2 Combi D2xC1X05 [red] 24vDC CLEAR 112dB(A) /116dB(A) 5J IP66 Zone 2 & 22
Lenker: | Manual | UL | IECEx | DoC | GA | DataSheet | ATEX
D2xC1X05 Alarm Horn Sounder & Xenon Strobe Beacon
 
 
The D2xC1X05 features a high output, 116dB(A) alarm horn sounder combined with a 5 Joule Xenon strobe beacon.
Low current consumption and high SPL in a robust Type 4/4X, IP66 enclosure ensure the D2xC1X05 is suitable for all haz loc fire alarm system and general signalling applications.
 
   
The corrosion proof, marine grade aluminium die cast enclosure is phosphated and powder coated providing resilience in the harshest of hazardous location environments.
One device, globally certified: ATEX, IECEx Zone 2 & 22; NEC/CEC CI D2 and CII D2; NEC CI Zone 2 and Zone 22; CEC Zone 2 & 22 and CII D2.
UL & cUL approved 24Vdc version for fire alarm use.
 
 
Features:
 
• One device, globally certified
• 5 Joule Xenon beacon with 116dB(A) alarm horn
• 64 alarm tones, 4 remotely selectable alarm stages/channels
• Automatic synchronisation on multi-sounder system
• Field changeable lens colours
 
 
Approvals:
 
UL File ref: E230764
ANSI/ISA 12.12.01 – 2013
CSA C22.2 No. 213-M1987
ANSI/UL60079-0-13
ANSI/UL60079-15-2013
ISA60079-31-2009
CAN/CSA C22.2 No. 60079-0-11
CAN/CSA C22.2 No. 60079-15-12
CAN/CSA C22.2 No. 60079-31-12

IECEx cert: IECEx ULD 14.0004X
IEC60079-0: ed. 6.0 (2011-06)
IEC60079-15: ed. 4.0 (2010-01)
IEC60031-31: ed. 2.0 (2013-11)
 
ATEX cert: DEMKO 14 ATEX 4786493904X
EN60079-0:2012
EN60079-15:2010
EN60079-31:2009
 

Coding:
 
NEC / CEC:Class I Div 2 ABCD T2B Ta -40°C to +70°C
Class I Div 2 ABCD T2C Ta -40°C to +55°C
Class I Div 2 ABCD T2D Ta -40°C to +40°C
Class II Div 2 FG T5 Ta -40°C to +50°C
Class III Div 1&2 Ta -40°C to +50°C
  
NEC:Class I Zone 2 AEx nA IIC T2 Gc (Ta -40°C to +50°C)
Zone 22 AEx tc IIIC 120°C Dc (Ta -40°C to +50°C)
  
CEC:Class I Zone 2 Ex nA IIC T2B Gc X
(Ta -40°C to +50°C)
Class I Zone 2 Ex nA IIC T2C Gc X
(Ta -40°C to +45°C)
Zone 22 Ex tc IIIC 120°C Dc (Ta -40°C to +50°C)
Class II Div 2 EFG T4A Ta -40°C to +50°C
  
IECEx & ATEX:II 3G Ex nA IIC T2 Gc (Ta -40°C to +50°C)
II 3D Ex tc IIIC 90°C Dc (Ta -40°C to +50°C)

 

 

Specification:
 
Sounder/Horn:
Maximum output:116dB(A) @ 1 metre [107dB(A) @ 10ft/3m]
Nominal output:112dB(A) @ 1m +/- 3dB
- Tone 2 [103dB(A) @ 10ft/3m]
No. of tones:64 (UKOOA / PFEER compliant)
No. of stages:4
Volume control:Adjustable -12dB(A) [Tone 2]
Effective range:125m/410ft @ 1KHz
Stage switching:
      DC units -Positive or Negative line
      AC units -Common supply line
    
Beacon:
Energy:5 Joules (5Ws)
Flash rate:1Hz (60 fpm)
Peak Candela:500,000 cd - calculated from energy (J)
Eff. Intensity cd:250 cd - calculated from energy (J)
Peak Candela:33,410 cd - measured ref. to I.E.S.
Eff. Intensity cd:94.78 cd - measured ref. to I.E.S.
Lens colours:Red, Amber, Yellow, Green, Blue, Clear & Magenta 
Tube life:Emissions are reduced to 70% after 8 million flashes
  
General:
Voltages DC:24vDC [20-28vDC]; 48vDC [38-58vDC]
Voltages AC:115vAC 50/60Hz; 230vAC 50/60Hz
Ingress protection:EN60529: IP66
UL50E / NEMA250: 4 / 4X / 3R / 13
Enclosure matl:Marine grade aluminium Al Si12 Cu
Colour:Red (RAL3000), Grey (RAL7038)
Cable entries:2 x M20 x 1.5mm threaded gland entries
Terminals:0.5 - 2.5mm² (20-14 AWG)
Grounding stud:M5
Operating temp:-40 to +70°C [-40° to +158°F] - Class I Div 2
-40 to +50°C [-40° to +122°F] - All other approvals
Relative humidity:90% at 20°C [68°F]
Weight: DC: 2.80kg/6.16Ibs AC:3.10kg/6.82Ibs
 
 *All candela data is representative of performance with clear lens at optimum voltage.
SPL data +/-3dB(A)
 
 
Part Codes:                     D2xC1X05 [u] [e] [m] [s] [v] [x] . [y]
 
 
[v]: Product version (A1) is not
included in the Part Code
because of space limitations,
and as this is the only option.
  
Version:Part code:
             
Product type:D2xC1X05Hazardious Location alarm horn
sounder & Xenon strobe beacon
  
Voltage: [u]DC02424vDC - UL/cUL Fire Alarm
DC04848vDC
AC115115vAC
AC230230vAC
  
Cable Entry Type: [e]A2 x M20x1.5mm (Standard)
B2 x 1/2" NPT - adaptors
C2 x 3/4" NPT - adaptors
D2 x M25x1.5mm - adaptors
E1 x 1/2" NPT - adaptor
F1 x 3/4" NPT - adaptor
G1 x M25x1.5mm - adaptor
Note:M20 stopping plugs for unused
entries supplied with all options
  
Adaptor/StoppingBBrass (Standard)
plug material: [m]NNickel Plated
SStainless Steel
  
Lens Guard1A2 304 Stainless Steel (Standard)
material: [s]2A4 316 Stainless Steel
  
Product version: [v]A1UL, cUL, IECEx & ATEX
(A1 is not included in the Part Code
because of space limitations, and
as this is the only option)
  
Enclosure colour: [x]RRed RAL3000 (Standard)
SSpecial - contact us!
  
Lens colour: .[y] .1Red
.2A  Amber (Orange)
.3Y  Yellow
.4Green
.5B  Blue
.7Clear (Transparent)
.8Magenta
 

Example part code:D2xC1X05 [u] [e] [m] [s] [x] . [y]
D2xC1X05 DC024 A B 1 R . 1
   
Explanation of the above:
Product type:"D2xC1X05" Hazardious Location alarm horn
                      sounder & Xenon strobe beacon
Voltage: [u]"DC024" = 24vDC
Cable Entry: [e]"A" = 2 x M20x1.5mm
Stopping plug[m]"B" = Brass (Standard)
Guard material: [s]"1" = A2 304 Stainless Steel (Standard)
Enclosure colour: [x]"R" = Red RAL3000 (Standard)
Lens colour: .[y] ."1" = (R) Red Lens colour
 

Effective Candela lens colour factor:
 
RedAmber Yellow GreenBlueClear
0.230.700.930.250.241.00
 
 
Current Consumption:
 
 
Alarm-SounderXenon-Beacon
  
Version:Voltage:Current:Voltage:Current:
   
 24vDC10-30vDC313mA20-28vDC250mA
 48vDC38-58vDC181mA42-54vDC149mA
115vAC  +/-10%  90mA+/-10%  70mA
230vAC  +/-10%  52mA+/-10%  35mA
 
 


Copyright © 2019 Marin Supply. All rights reserved.
Forretningssystem og netthandel er levert av MultiCase™ Norge AS
(3.18.8.132)