Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.


Handlevognen er tom.


Ex Combi STExC1X05 R DC024 AS2A1R RED

SS316L+304 IP66 110dB(A)5J ExdbIICGbT6

STEXC105RDC24AS3A1R1 E2S STExC1X05F024AS2R/R Ex Combi STExC1X05 R DC024 AS2A1R RED SS316L+304  IP66 110dB(A)5J ExdbIICGbT6
STEXC105RDC24AS3A1R1 E2S STExC1X05F024AS2R/R Ex Combi STExC1X05 R DC024 AS2A1R RED SS316L+304  IP66 110dB(A)5J ExdbIICGbT6
Lenker: | IECEx | ATEX | GA | DoC | DataSheet | Manual
STEx C1X05 F Alarm Horn & Xenon Strobe Radial

in 316L Stainless Steel enclosure and 304 Bracket/Guard.
Entries: 4 x M20
Stopping plug: Stainless Steel
Enclosure Colour: Red

117dB(A) horn & 5 Joule Xenon. The STExC1X05F is a high output alarm horn sounder with re-entrant flare horn combined with a 500,000cd Xenon strobe beacon. The robust IP66 316L stainless steel enclosure ensures the STExC1X05F is suitable for all IECEx & ATEX Zone 1, 2, 21 & 22 explosion proof signaling applications.
The alarm horn & Xenon strobe allow simultaneous or independent operation. Featuring 64 first stage/channel alarm sounds, the alarm tone frequencies for the first 2 stages are independently selectable. Each of the available 4 stage/channels can be remotely triggered e.g. via an external relay.
 • Robust corrosion proof 316L stainless steel enclosure
 • High output; up to 117dB(A)
 • 4 remotely selectable alarm stages/channels
 • Positive or negative line stage/channel switching
 • Choice of 64 alarm tone frequencies
 • User selectable strobe flash rates
 • Field replaceable lens colour filter
 • Automatic synchronisation on multi-beacon & sounder systems
 • Continuously rated
 • Compact form factor
 • Stainless steel fixings
 • Ratchet adjustable 316 stainless steel bracket
 • 316 Stainless steel stopping plugs included
 • 3 x cable entries
 • Duplicate cable terminations (in & out for daisy-chain installations)
 • Available with custom tone configurations and frequencies
IECEx ULD 16.0017X
IEC 60079-0 : 2011
IEC 60079-1 : 2014
IEC 60079-31 : 2013

EN 60079-0 : 2012 + A11 : 2013
EN 60079-1 : 2014
EN 60079-31 : 2014


  • II 2G Ex db IIC Gb T6 Ta -50°C to +40°C
  • II 2G Ex db IIC Gb T5 Ta -50°C to +55°C
  • II 2G Ex db IIC Gb T4 Ta -50°C to +70°C
  • II 2D Ex tb IIIC Db T110°C Ta -50°C to +70°C

    Alarm Horn:
    Maximum output:117dB(A) @ 1 metre [108dB(A) @ 10ft/3m]
    Nominal output:113dB(A) @ 1m +/- 3dB - Tone 2
    [104dB(A) @ 10ft/3m]
    No. of tones:64 (UKOOA / PFEER compliant)
    No. of stages:4
    Volume control:Adjustable -12dB(A)
    Effective range:125m/410ft @ 1KHz
    Supply Voltages:24vDC; 115vAC; 230vAC
    Stage switching:DC units: negative or positive
    AC units: common supply line
    Strobe Beacon:
    Energy:5 Joules (5Ws)
    Flash rates:Option 1: 1Hz (60 fpm)
    Option 2: 1.5Hz (90 fpm)
    Option 3: Double Strike
    Peak Candela:500,000 cd - calculated from energy (J)
    Eff. Intensity:250 cd - calculated from energy (J)
    Peak Candela:46,976 cd* - measured ref. to I.E.S.
    Eff. Intensity:143 cd* - measured ref. to I.E.S.
    Lens colours:Red, Amber, Yellow, Green, Blue, Clear & Magenta 
    Tube life:Emissions are reduced to 70% after 8 million flashes
    Ingress protection:EN60529: IP66
    Enclosure matl:316L Stainless Steel
    Enclosure finish:Chromated & powder coated
    Colour:RAL3000 Red
    Cable entries:3 x M20 ISO (2 x stopping plugs included as standard)
    Adaptors to M25, 1/2" & 3/4" NPT can be specified
    Terminals:0.5 - 2.5mm² (20-14 AWG)
    Enclosure volume:<2 litres
    Line monitoring:Blocking diode included
    EOL Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor
    or diode (DC versions) can be fitted
    Grounding stud:M5
    Temp. range:-50° to +70°C (-58°F to +158°F)
    Relative humidity:90% at 20°C [68°F]
    Weight: ?kg / ?lbs
     *All candela data is representative of performance with clear lens at optimum voltage.
    Part Codes:                       STExC1X05 F [u] [e] [m] [s] [x] . [y]
    Version:Part code:
    Product type:STExC1X05
    Horn type:RRadial Horn
    Voltage: [u]01212vDC (10-14vDC)
    02424vDC (20-28vDC)
    04848vDC (42-54vDC)
    230230vAC (220-240vAC)
    Cable Entry Type: [e]A3 x M20x1.5mm (Standard)
    B2 x 1/2" NPT - adaptors
    C2 x 3/4" NPT - adaptors
    D2 x M25x1.5mm - adaptors
    E1 x 1/2" NPT - adaptor
    F1 x 3/4" NPT - adaptor
    G1 x M25x1.5mm - adaptor
    Note:M20 stopping plugs for unused
    entries supplied with all options
    plug material: [m]NNickel Plated
    SStainless Steel (Standard)
    Guard material: [s]1A2 304 Stainless Steel
    2A4 316 Stainless Steel (Standard)
    Enclosure colour: [x]RRed (Standard)
    Lens colour: .[y] .1Red
    .2A  Amber (Orange)
    .3Y  Yellow
    .5B  Blue
    .7Clear (Transparent)

    Example part code:STExC1X05 F [u] [e] [m] [s] [x] . [y]
    STExC1X05 F 024 A S 2 R . 1
    Explanation of tehe above:
    Product type:"STExC1X05"
    Horn Type:"F" = Flare re-entrant horn
    Voltage: [u]"024" = 24vDC (20-28vDC)
    Cable Entry: [e]"A" = 3 x M20x1.5mm
    Stopping plug[m]"S" = Stainless Steel (Standard)
    Bracket material: [s]"2" = A4 316 Stainless Steel Guard
    Enclosure colour: [x]"R" = Red Enclosure colour
    Lens colour: .[y] ."1" = (R) Red Lens colour

    Effective Candela lens colour factor:
    RedAmber Yellow GreenBlueClear
    Current Consumption:
    Voltage:Range:Alarm Horn:Xenon Stobe:Combined:
     12vDC10-14vDC 146mA678mA824mA
     24vDC20-28vDC 185mA323mA508mA
     48vDC42-54vDC 138mA198mA336mA
     Nominal current. Alarm horn sounder: Tone 2, Xenon Strobe: 1Hz Flash Rate

    Copyright © 2020 Marin Supply. All rights reserved.
    Forretningssystem og netthandel er levert av MultiCase™ Norge AS