2000528
9880
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
Totalt antall treff:
|
Antall artikler funnet:
|
Handlevogn
Handlevognen er tom.
Ex RadialHorn STEXS1RDC024AS2A1R 24vDC
SS316L IP66 110dB(A) ExdbIICGbT6
Varenr:
STEXS1RDC024AS2A1R
|
|
STExS1R Radial Alarm Horn Sounder
in 316L Stainless Steel enclosure
The STExS1R is a high output, 115dB(A) alarm horn sounder with a re-entrant flare horn. Low current consumption and high SPL in a robust IP66 corrosion proof 316L stainless steel enclosure ensure the STExS1R is suitable for all Zone 1, 2, 21 & 22 explosion proof signalling applications.
Featuring 64 first stage/channel alarm sounds which can be selected via an internal switch. The alarm tone frequencies for the first 2 stages are independently selectable. Each tone can be remotely triggered e.g. via an external relay, to change to a second, third or fourth stage/channel alarm sound. The enclosure features a threaded flame path, triple cable entries and a large termination area - all of which significantly reduce installation time.
Features:
• Robust corrosion proof 316L stainless steel enclosure
• High output, up to 115dB(A)
• 4 remotely selectable alarm stages/channels
• Positive or negative line stage/channel switching
• Choice of 64 alarm tone frequencies
• Automatic synchronisation on multi-sounder system
• Continuously rated
• Compact form factor
• Stainless steel fixings
• Ratchet adjustable 316 stainless steel bracket
• 316 Stainless steel stopping plugs included
• 3 x cable entries
• Duplicate cable terminations (in & out for daisy-chain installations)
• Available with custom tone configurations and frequencies
Approvals:
IECEx ULD 16.0017X
IEC 60079-0 : 2011
IEC 60079-1 : 2014
IEC 60079-31 : 2013
ATEX DEMKO 16 ATEX 1466X
EN 60079-0 : 2012 + A11 : 2013
EN 60079-1 : 2014
EN 60079-31 : 2014
TR-CU Ex EAC certificate: RU C-GB.AA71.B.00109
Coding:
• Ex db IIC Gb T6 Ta -50°C to +65°C
• Ex db IIC Gb T5 Ta -50°C to +70°C
• Ex tb IIIC Db T85°C Ta -50°C to +70°C
Specification:
Maximum output: | 115dB(A) @ 1 metre [107dB(A) @ 10ft/3m] |
Nominal output: | 110dB(A) @ 1m +/- 3dB - Tone 2 |
| [103dB(A) @ 10ft/3m] |
No. of tones: | 64 (UKOOA / PFEER compliant) |
No. of stages: | 4 |
Volume control: | Adjustable -12dB(A) [Tone 2] |
Effective range: | 125m/410ft @ 1KHz |
Supply Voltages: | 24vDC; 110 - 240vAC |
Stage switching: | DC units: negative or positive |
| AC units: common supply line |
Ingress protection: | EN60529: IP66 |
Enclosure matl: | 316L Stainless Steel |
Enclosure finish: | Chromated & powder coated |
Colour: | RAL3000 Red |
Cable entries: | 3 x M20 ISO (2 x stopping plugs included as standard) |
| Adaptors to M25, 1/2" & 3/4" NPT can be specified |
Terminals: | 0.5 - 2.5mm² (20-14 AWG) |
Enclosure volume: | <2 litres |
Line monitoring: | Blocking diode included |
| EOL Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor |
| or diode (DC versions) can be fitted |
Grounding stud: | M5 |
Temp. range: | -50° to +70°C (-58°F to +158°F) |
Relative humidity: | 90% at 20°C [68°F] |
Weight: | 6.00kg / 13.22lbs |
Part Codes: STEx S1 R [u] [e] [m] [s] [v] [x]
Version: | Part code: | |
| | |
Product type: | STEx S1 | |
Horn type: | R | Radial horn |
| | |
Voltage: [u] | 024 | 24vDC (10-30vDC) |
| 230 | 230vAC (110-240vAC) |
| | |
Cable Entry Type: [e] | A | 3 x M20x1.5mm (Standard) |
| B | 2 x 1/2" NPT - adaptors |
| C | 2 x 3/4" NPT - adaptors |
| D | 2 x M25x1.5mm - adaptors |
| E | 1 x 1/2" NPT - adaptor |
| F | 1 x 3/4" NPT - adaptor |
| G | 1 x M25x1.5mm - adaptor |
| Note: | M20 stopping plugs for unused |
| | entries supplied with all options |
| | |
Adaptor/Stopping | B | Brass |
plug material: [m] | N | Nickel Plated |
| S | Stainless Steel (Standard) |
| | |
Bracket material: [s] | 1 | A2 304 Stainless Steel |
| 2 | A4 316 Stainless Steel (Standard) |
| 3 | A2 304 St/St with Equip. Tag |
| 4 | A4 316 St/St with Equip. Tag (304) |
| | |
Product version: [v] | A1 | Group II 2G/D Zone 1, 2, 21 & 22 |
| | (Standard) |
| | |
Enclosure colour: [x] | R | Red RAL3000 (Standard) |
Example part code: | STEx S1 R [u] [e] [m] [s] [v] [x] |
| STEx S1 R 024 A S 2 A1 R |
| |
Explanation of tehe above: | |
Product type: | "STEx S1" |
Horn Type: | "R" = Radial horn |
Voltage: [u] | "024" = 24vDC (10-30vDC) |
Cable Entry: [e] | "A" = 3 x M20x1.5mm |
Stopping plug: [m] | "S" = Stainless Steel |
Bracket material: [s] | "2" = A4 316 Stainless Steel Guard |
Product version: [v] | "A1" = Group II 2G/D Zone 1, 2, 21 & 22 |
Enclosure colour: [x] | "R" = Red Enclosure colour |
Current Consumption:
Version: | | Voltage: | Current: | |
10-30vDC | | 24vDC | 217mA | |
110-240vAC | 50/60Hz | 115vAC | 77mA | |
110-240vAC | 50/60Hz | 230vAC | 53mA | |
Nominal current: Tone 2