10134
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

Ex Flare Horn STEXS1FDC024AS2A1R 24vDC

SS316L IP66 110dB(A) ExdbIICGbT6

Varenr:
STEXS1FDC024AS2A1R
STEXS1FDC024AS2A1R E2S STEXS1FDC024AS2A1R Ex Flare Horn STEXS1FDC024AS2A1R 24vDC SS316L IP66 110dB(A) ExdbIICGbT6
STEXS1FDC024AS2A1R E2S STEXS1FDC024AS2A1R Ex Flare Horn STEXS1FDC024AS2A1R 24vDC SS316L IP66 110dB(A) ExdbIICGbT6
Lenker: | IECEx | ATEX | DoC | GA | Manual | DataSheet
STExS1F Flare Alarm Horn Sounder
in 316L Stainless Steel enclosure
 
 
The STExS1F is a high output, 117dB(A) alarm horn sounder with a re-entrant flare horn. Low current consumption and high SPL in a robust IP66 corrosion proof 316L stainless steel enclosure ensure the STExS1F is suitable for all Zone 1, 2, 21 & 22 explosion proof signalling applications.
 
 
Featuring 64 first stage/channel alarm sounds which can be selected via an internal switch. The alarm tone frequencies for the first 2 stages are independently selectable. Each tone can be remotely triggered e.g. via an external relay, to change to a second, third or fourth stage/channel alarm sound. The enclosure features a threaded flame path, triple cable entries and a large termination area - all of which significantly reduce installation time.
 
 
Features:
 
 • Robust corrosion proof 316L stainless steel enclosure
• High output, up to 117dB(A)
• 4 remotely selectable alarm stages/channels
• Positive or negative line stage/channel switching
• Choice of 64 alarm tone frequencies
• Automatic synchronisation on multi-sounder system
• Continuously rated
• Compact form factor
• Stainless steel fixings
• Ratchet adjustable 316 stainless steel bracket
• 316 Stainless steel stopping plugs included
• 3 x cable entries
• Duplicate cable terminations (in & out for daisy-chain installations)
• Available with custom tone configurations and frequencies
 
 
Approvals:
 
IECEx ULD 16.0017X
IEC 60079-0 : 2011
IEC 60079-1 : 2014
IEC 60079-31 : 2013
 
ATEX DEMKO 16 ATEX 1466X
EN 60079-0 : 2012 + A11 : 2013
EN 60079-1 : 2014
EN 60079-31 : 2014
 
TR-CU Ex EAC certificate: RU C-GB.AA71.B.00109

Coding:

 
 • Ex db IIC Gb T6 Ta -50°C to +65°C
• Ex db IIC Gb T5 Ta -50°C to +70°C
• Ex tb IIIC Db T85°C Ta -50°C to +70°C

 

 
Specification:
 
Maximum output:117dB(A) @ 1 metre [108dB(A) @ 10ft/3m]
Nominal output:113dB(A) @ 1m +/- 3dB - Tone 2
[103dB(A) @ 10ft/3m]
No. of tones:64 (UKOOA / PFEER compliant)
No. of stages:4
Volume control:Adjustable -12dB(A) [Tone 2]
Effective range:125m/410ft @ 1KHz
Supply Voltages:24vDC; 110 - 240vAC
Stage switching:DC units: negative or positive
AC units: common supply line
Ingress protection:EN60529: IP66
Enclosure matl:316L Stainless Steel
Enclosure finish:Chromated & powder coated
Colour:RAL3000 Red
Cable entries:3 x M20 ISO (2 x stopping plugs included as standard)
Adaptors to M25, 1/2" & 3/4" NPT can be specified
Terminals:0.5 - 2.5mm² (20-14 AWG)
Enclosure volume:<2 litres
Line monitoring:Blocking diode included
EOL Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor
or diode (DC versions) can be fitted
Grounding stud:M5
Temp. range:-50° to +70°C (-58°F to +158°F)
Relative humidity:95% - Additional tropicalisation is recommended for
applications where both high relative humidity and
high ambient temperatures exist
Weight: 6.25kg / 13.75lbs
 
 
 
Part Codes:                       STEx S1 F [u] [e] [m] [s] [v] [x]
 
 
Version:Part code:
             
Product type:STEx S1
Horn type:FFlare re-entrant horn
  
Voltage: [u]DC02424vDC (10-30vDC)
AC230230vAC (110-240vAC)
  
Cable Entry Type: [e]A3 x M20x1.5mm (Standard)
B2 x 1/2" NPT - adaptors
C2 x 3/4" NPT - adaptors
D2 x M25x1.5mm - adaptors
E1 x 1/2" NPT - adaptor
F1 x 3/4" NPT - adaptor
G1 x M25x1.5mm - adaptor
Note:M20 stopping plugs for unused
entries supplied with all options
  
Adaptor/StoppingBBrass
plug material: [m]NNickel Plated
SStainless Steel (Standard)
  
Bracket material: [s]1A2 304 Stainless Steel
2A4 316 Stainless Steel (Standard)
3A2 304 St/St with Equip. Tag
4A4 316 St/St with Equip. Tag (304)
      
Product version: [v]A1Group II 2G/D Zone 1, 2, 21 & 22
(Standard)
  
Enclosure colour: [x]RRed RAL3000 (Standard)
 

Example part code:STEx S1 F [u] [e] [m] [s] [v] [x]
STEx S1 F 024 A S 2 A1 R
 
Explanation of tehe above:
Product type:"STEx S1"
Horn Type:"F" = Flare re-entrant horn
Voltage: [u]"DC024" = 24vDC (10-30vDC)
Cable Entry: [e]"A" = 3 x M20x1.5mm
Stopping plug[m]"S" = Stainless Steel
Bracket material: [s]"2" = A4 316 Stainless Steel Guard
Product version: [v]"A1" = Group II 2G/D Zone 1, 2, 21 & 22
Enclosure colour: [x]"R" = Red Enclosure colour
 

 
 
Current Consumption:
 
Version:Voltage:Current:
10-30vDC 24vDC217mA
110-240vAC 50/60Hz115vAC  77mA
110-240vAC 50/60Hz230vAC  53mA
 
 Nominal current: Tone 2
 
 


Copyright © 2019 Marin Supply. All rights reserved.
Forretningssystem og netthandel er levert av MultiCase™ Norge AS
(3.18.8.132)