2000045
6283
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
|
Totalt antall treff:
|
|
Antall artikler funnet:
|
Handlevogn
Handlevognen er tom.
Airhorn TYFON KTV 75/400 24vDC
120-135dB(A) 400Hz w/TV88 solenoid
|
|
Kockum Sonics TYFON KTV 75/400 complete with solenoid TV88 24vDC
General Information
- Light. rigid and powerful signalling apparatus for different applications e.g. aboard ships, in industry, for military applications and for heavy vehicles etc.
- Material: Plastic resin of high impact and vibration strength, certain parts glass-fibre reinforced.
- Entirely maintenance-free. The diaphragm never wears out.
- Sound intensity can be adjusted by a choke screw and a sordine.
Technical Data
Frequency: Basic note 400 Hz. completed by power and noise penetrating harmonics.
Sound level: At normal adjustment setting. approx. 5 lit/sec.
136 dB(A) at 1 m
120 dB(A) at 6 m
Can be reduced 15 dB with a choke screw if required.
For further reduction. a sordine type TG 5 can be applied.
Working pressure:
In housing (after choke screw): 0.2-0.5 MPa*
In inlet: 0.2-1.2 MPa*
* overpressure
Note: When supply pressure is more than 0.7 MPa. the choke must be adjusted so as to attain a clear tone without straining the apparatus.
(1 MPa = 10 Bar)
Weight: TYFON only - 0.34 kg
Solenoid Valve TV88
Standard voltage for Solenoid Valve TV 88: DC: 24V 115V. 230V AC: 115V 230V
The valve is delivered with filter and complete fittings for plastic tubing on the outlet side and for copper piping with O.D. 8mm on the inlet side. The valve should not be placed outdoors without protective cover.
The short connection between valve and signal apparatus should preferably be of flexible material. (Rubber hose or plastic tubing). For distinct code signals. the pipe line must not be longer than 6m between TYFON and Valve.
TYFON KT 75/400 can also be driven by halogencompound gas particularly together with fire extinguishing plants.
Note: Blow the pipe line thoroughly clean with compressed air before connecting to signal apparatus or valve.