9986
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

Sounder A121AX Appello X 230vAC [ red]

111dB(A)/126dB(A)@1 m IP66 45T 90-260vAC

Varenr:
A121AXAC230R-UL
A121AXAC230R-UL E2S A121AXAC230R-UL Sounder A121AX Appello X 230vAC [ red] 111dB(A)/126dB(A)@1 m IP66 45T 90-260vAC
A121AXAC230R-UL E2S A121AXAC230R-UL Sounder A121AX Appello X 230vAC [ red] 111dB(A)/126dB(A)@1 m IP66 45T 90-260vAC
Lenker: | DataSheet | DoC | CoC | Manual | GA
A121AX Appello X
 
 
The A121AX Appello X is the next generation of user recordable alarm sounder capable of storing up to 2 minutes of content. The A121AX records, stores and plays back with unsurpassed clarity, user defined voice messages, music or sounds stored directly to non-volatile memory.
Low current consumption and CD quality reproduction in a robust fire retardant Type 4/4X/3R/13, IP66 housing ensure the A121AX Appello X is suitable for all general signalling applications including fire, security and process control.
 
 
Features:
 
The A121NAX Appello user recordable unit enables the recording of any type of content such as voice or music that can be played back at CD quality output at SPL’s of up to 112dB(A) at 1 metre. This content can be reproduced repeatedly, alternating with or without one of the built-in 45 alarm tones. The alarm tone notification has an output of up to 126dB(A) at 1 metre.

For multiple unit installations the recording process is only required once to create a master unit which can then be used to program all other A121NAX units on the system, guaranteeing synchronisation during playback, using the supplied ‘Synch’ cable.
 
  • Direct content storage on non-volatile memory.
  • CD quality reproduction.
  • Message length: 4 x 30 seconds
  • Easy message creation with built in microphone or line-in audio input.
  • Volume controls for user content and alarm tones.
  • Available with custom tone configurations and frequencies.
  • Factory programming of user supplied content also available.
  • UL approved for general signalling use. 
 
      
Approvals:
 
UL & cULs approved: General signalling use
EAC approved (GOST-R)
 
 
Specification:
  
Voice content
output:111dB(A) @ 1 metre [102dB(A) @ 10ft/3m]
Music content
output:112dB(A) @ 1 metre [103dB(A) @ 10ft/3m]
Alarm tone
output:126dB(A) @ 1 metre [117dB(A) @ 10ft/3m]
No. of tones:45 (UKOOA / PFEER compliant)
No. of messages:4 (30 seconds each)
Volume controls:Independent controls for user recorded content and
built-in alarm tones.
Effective range:300m / 984ft @ 1KHz
Voltages DC:24vDC (14-30vDC)
Voltages AC:90-260vAC 50/60Hz
Ingress protection:Type 4 / 4X / 3R / 13, IP66
Rating:Continuous
Housing material:UL94V0 & 5VA FR ABS
Housing colour:Red (RAL3000) or Grey (RAL7038)
Fixings:Stainless Steel
Cable entries:2 x M20 clearance gland entries.
Custom configurations also available.
Terminals:0.5 to 2.5mm²
Operating temp:-25° to +55°C [-13° to +131°F]
Storage temp:-40° to +70°C [-40° to +158°F]
Relative humidity:90% at 20°C [68°F]
Weight:DC: 2.10kg [4.62Ibs] / AC: 2.70kg [5.94Ibs]
  
*SPL data +/-3dB(A). Measured at optimum voltage. 
 
            
Part Codes:
  
Version:Part code:
14-30vDCA121AXDC024[x]-UL
90-260vACA121AXAC230[x]-UL
  
[x] = Housing colour:R: Red, G: Grey
  
          
 
Current Consumption:
  
Version:Voltage:
Current:
 24vDC14-30vDC1.51A*
230vAC50/60Hz+/-10%517mA*
  
* current at nominal voltage on Tone 2
        


Copyright © 2019 Marin Supply. All rights reserved.
Forretningssystem og netthandel er levert av MultiCase™ Norge AS
(3.18.8.132)