10171
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

Sounder A112N R-M 24vDC [red] MED

112dB(A) IP66 45T 10-30vDC MED-Certified

Varenr:
A112NDC24R-M
A112NDC24R-M E2S A112NDC24R-MED Sounder A112N R-M 24vDC [red] MED 112dB(A) IP66 45T 10-30vDC MED-Certified
A112NDC24R-M E2S A112NDC24R-MED Sounder A112N R-M 24vDC [red] MED 112dB(A) IP66 45T 10-30vDC MED-Certified
Lenker: | VdS | GA | IP | MED | MED-D | DataSheet | Manual
A112N Alarm Sounder

The A112N is a high output, 119dB(A) alarm sounder. UL and GOST-R approved and tested to EN54-3 for CPR compliance (89/106/EEC) for fire alarm use. For marine applications the A112N is MED approved.
 
Description:
 
High SPL in a robust fire retardant IP66 housing ensure the A112N is suitable for all general signalling applications including fire, security and process control.
      
Features:
 
• Automatic synchronisation on multi-sounder system.
• Continuously rated.
• Stainless steel fixings.
• Unit can be mounted using external lugs or internal BESA compatible fixing positions.
• Duplicate cable terminations (in & out for daisy-chain installations).
• Tropicalisation available on request.
• Available with custom tone configurations and frequencies.
• Stage programmable version available:
  - 45 alarm tones
  - 4 remotely selectable stages
  - Any tone can be assigned to any stage
  - User configurable continuous frequency tone
      
Specification:
 
Maximum output:119dB(A) @ 1 metre [110dB(A) @ 10ft/3m]
Nominal output:112dB(A) @ 1m +/- 3dB
– Tone 2 [103dB(A) @ 10ft/3m]
No. of tones:45 (UKOOA / PFEER compliant)
No. of stages:3
Volume control:Max. 112dB(A); Min. 100dB(A) – Tone 2
Effective range:125m/410ft @ 1KHz
Voltages DC:24vDC (10-30vDC);
48vDC (35-60vDC);
110vDC (90-250vDC)
[24vDC units can use 24vAC for single stage apps.]
Voltages AC:24VvAC; 115vAC; 230vAC
Stage switching:Negative or optional positive
Reverse polarity stage switching on DC units.
Ingress protection:IP66
Enclosure material:High impact UL94 V0 & 5VA FR ABS
Enclosure colour:Red (RAL3000), Grey (RAL7038) & White
Cable entries:2 x M20 clearance gland entries in side & back
Terminals:0.5 to 4.0mm² cables
Operating temp: -25 to +55°C [-13° to +131°F]
Storage temp:-40 to +70°C [-40° to +158°F]
Relative humidity:90% at 20°C [68°F]
Weight: DC: 1.80kg/3.96Ibs AC:2.10kg/4.62Ibs
 
 *SPL data +/-3dB(A). Measured at optimum voltage.
           
Current Consumption:
 
Version:Voltage:Current:
  
24vDC10-30vDC200mA*
48vDC35-60vDC120mA*
110vDC90-250vDC60mA
24vAC 50/60Hz+/-10%500mA
115vAC 50/60Hz+/-10%100mA
230vAC 50/60Hz +/-10% 60mA
       
* current at nominal voltage on Tone 2
         
Part Codes:
 
Version:Part code:
  
24vDCA112N DC24 [x]
48vDCA112N DC48 [x]
110vDCA112N DC110 [x]
24vACA112N AC24 [x]
115vACA112N AC115 [x]
230vACA112N AC230 [x]
  
[x] = Enclosure colour:G: Grey R: Red
  
Suffix part number with ‘-P’ for stage programmable, 4 stage, 45 tone version (not available with UL approval).
Suffix part number with ‘-UL’ for UL approved version. 110vDC/230vDC unit not available as UL approved
Suffix part number with ‘-M’ for MED approved version. 24V dc unit only
        
Approvals:
    
• EN54-3 (CPD 89/106/EEC).
• UL & cULus approved: General signalling use.
• GOST-R approved. Cert: POCC GB.JB05.H00144.
• Marine Equipment Directive (MED)Certificate: MEDB00001BU
          
Tone Table:
          
Stage 1Frequency Description (Stg 2 (Stg 3
   
T 1340 Hz Continuous T 2T 5
T 2 800/1000Hz @ 0.25 sec Alternating T 17 T 5
T 3 500/1200Hz @ 0.3Hz 0.5 sec Slow WhoopT 2T 5
T 4 800/1000Hz @ 1Hz Sweeping T 6T 5
T 52400Hz Continuous T 3 T 20
T 6 2400/2900Hz @ 7Hz Sweeping T 7 T 5
T 72400/2900Hz @ 1Hz Sweeping T 10 T 5
T 8500/1200/500Hz @ 0.3Hz Sweeping T 2T 5
T 91200/500Hz @ 1Hz – DIN / PFEER P.T.A.P.T 15T 2
T 102400/2900Hz @ 2Hz Alternating T 7 T 5
T 11  1000Hz @ 1Hz Intermittent T 2 T 5
T 12  800/1000Hz @ 0.875Hz Alternating T 4 T 5
T 13  2400Hz @ 1Hz Intermittent T 15T 5
T 14 800Hz 0.25sec on, 1 sec off Intermittent T 4T 5
T 15  800Hz Continuous T 2T 5
T 16660Hz 150mS on, 150mS off Intermittent T 18T 5
T 17  544Hz (100mS)/440Hz (400mS) – NF S 32-001 T 2 T 27
T 18660Hz 1.8sec on, 1.8sec off Intermittent T 2T 5
T 19  1.4KHz-1.6KHz 1s, 1.6KHz-1.4KHz 0.5s
-NFC48-265T 2T 5
T 20  660Hz Continuous T 2T 5
T 21  554Hz/440Hz @ 1Hz Alternating T 2T 5
T 22  544Hz @ 0.875 sec. Intermittent T 2T 5
T 23  800Hz @ 2Hz Intermittent T 6 T 5
T 24  800/1000Hz @ 50Hz Sweeping T 29 T 5
T 25  2400/2900Hz @ 50Hz Sweeping T 29 T 5
T 26  BellT 2 T 15
T 27  554Hz ContinuousT 26 T 5
T 28  440Hz Continuous T 2 T 5
T 29  800/1000Hz @ 7Hz Sweeping T 7T 5
T 30  300Hz Continuous T 2 T 5
T 31  660/1200Hz @ 1Hz Sweeping T 26 T 5
T 32  Two T chimeT 26 T 15
T 33  745Hz @ 1Hz IntermittentT 2T 5
T 34  1000 & 2000Hz @ 0.5 sec Alternating
 – Singapore T 38 T 45
T 35  420Hz @ 0.625 sec Australian Alert T 36 T 5
T 36  500-1200Hz 3.75sec /0.25sec. Australian Evac.T 35 T 5
T 37  1000Hz Continuous – PFEER Toxic Gas T 9 T 45
T 38  2000Hz Continuous T 34 T 45
T 39800Hz 0.25sec on, 1 sec off Intermittent T 23 T 17
T 40  544Hz (100mS)/440Hz (400mS) – NF S 32-001 T 31 T 27
T 41  Motor Siren – slow rise to 1200 Hz T 2T 5
T 42  Motor Siren – slow rise to 800 Hz T 2 T 5
T 43  1200 Hz Continuous T 2T 5
T 44  Motor Siren – slow rise to 2400 Hz T 2 T 5
T 45 1KHz 1s on, 1s off Intermittent
– PFEER Gen. Alarm T 38 T 34
   
 Country specific or custom tone configurations and alarm frequencies are available upon request.     
            
 



Copyright © 2019 Marin Supply. All rights reserved.
Forretningssystem og netthandel er levert av MultiCase™ Norge AS
(3.18.8.132)