Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.


Handlevognen er tom.


Sounder A105N R-M 24vDC [red] MED

105dB(A) IP66 32T 10-30vDC MED-Certified

A105NDC24R-M E2S A105NDC24R-MED Sounder A105N R-M 24vDC [red] MED 105dB(A) IP66 32T 10-30vDC MED-Certified
A105NDC24R-M E2S A105NDC24R-MED Sounder A105N R-M 24vDC [red] MED 105dB(A) IP66 32T 10-30vDC MED-Certified
Lenker: | DataSheet | MED | MED-D | IP | EC-CoC | GA | Manual
A105N Alarm Sounder

The A105N is a high output, 112dB(A) alarm sounder. UL and GOST-R approved and tested to EN54-3 for CPR compliance (89/106/EEC) for fire alarm use. For marine applications the A105N is MED approved.
Low current consumption and high SPL in a robust fire retardant IP66 housing ensure the A105N is suitable for all general signalling applications including fire, security and process control.
• Automatic synchronisation on multi-sounder system.
• Continuously rated.
• Stainless steel fixings.
• Unit can be mounted using external lugs or internal BESA compatible fixing positions.
• Duplicate cable terminations (in & out for daisy-chain installations).
• Tropicalisation available on request.
• Available with custom tone configurations and frequencies.
• Stage programmable version available:
  - 45 alarm tones
  - 4 remotely selectable stages
  - Any tone can be assigned to any stage
  - User configurable continuous frequency tone
Maximum output:112dB(A) @ 1 metre [103dB(A) @ 10ft/3m]
Nominal output:105dB(A) @ 1m +/- 3dB – Tone 2
[96dB(A) @ 10ft/3m]
No. of tones:32 (UKOOA / PFEER compliant)
No. of stages:3
Volume control:Max. 105dB(A); Min. 96dB(A) – Tone 2
Effective range:60m/197ft @ 1KHz
Voltages DC:24vDC (10-30vDC);
48vDC (35-60vDC);
110vDC (72-130vDC)
[24vDC units can use 24vAC for single stage apps.]
Voltages AC:24VvAC; 115vAC; 230vAC
Stage switching:Negative
Positive switching option available
Reverse polarity stage switching on DC units.
Ingress protection:IP66
Enclosure material:High impact UL94 V0 & 5VA FR ABS
Enclosure colour:Red (RAL3000), Grey (RAL7038) & White
Cable entries:2 x M20 clearance gland entries in side & back
Terminals:0.5 to 1.5mm² cables
Operating temp: -25 to +55°C [-13° to +131°F]
Storage temp:-40 to +70°C [-40° to +158°F]
Relative humidity:90% at 20°C [68°F]
Weight: DC: 0.75kg/1.65Ibs AC:1.00kg/2.2Ibs
 *SPL data +/-3dB(A). Measured at optimum voltage.
Current Consumption:
24vAC 50/60Hz+/-10%40mA
115vAC 50/60Hz+/-10%20mA
230vAC 50/60Hz +/-10% 15mA
* current at nominal voltage on Tone 2
Part Codes:
Version:Part code:
24vDCA105N DC24 [x]
48vDCA105N DC48 [x]
110vDCA105N DC127 [x]
24vACA105N AC24 [x]
115vACA105N AC115 [x]
230vACA105N AC230 [x]
[x] = Enclosure colour:G: Grey R: Red W: White
Suffix part number with ‘-P’ for stage programmable, 4 stage, 45 tone version (not available with UL approval).
Suffix part number with ‘-UL’ for UL approved version. 110V dc unit not available as UL approved
Suffix part number with ‘-M’ for MED approved version. 24V dc unit only
• EN54-3 (CPD 89/106/EEC).
• UL & cULs approved: General signalling use.
• GOST-R approved. Cert: POCC GB.JB05.H00144.
• Marine Equipment Directive (MED) Certificate: MEDB00001BU
Tone Table:
Stage 1Frequency Description (Stg 2 (Stg 3
T 1340 Hz Continuous T 2T 5
T 2 800/1000Hz @ 0.25 sec Alternating T 17 T 5
T 3 500/1200Hz @ 0.3Hz 0.5 sec Slow WhoopT 2T 5
T 4 800/1000Hz @ 1Hz Sweeping T 6T 5
T 52400Hz Continuous T 3 T 20
T 6 2400/2900Hz @ 7Hz Sweeping T 7 T 5
T 72400/2900Hz @ 1Hz Sweeping T 10 T 5
T 8500/1200/500Hz @ 0.3Hz Sweeping T 2T 5
T 91200/500Hz @ 1Hz – DIN / PFEER P.T.A.P.T 15T 2
T 102400/2900Hz @ 2Hz Alternating T 7 T 5
T 11  1000Hz @ 1Hz Intermittent T 2 T 5
T 12  800/1000Hz @ 0.875Hz Alternating T 4 T 5
T 13  2400Hz @ 1Hz Intermittent T 15T 5
T 14 800Hz 0.25sec on, 1 sec off Intermittent T 4T 5
T 15  800Hz Continuous T 2T 5
T 16660Hz 150mS on, 150mS off Intermittent T 18T 5
T 17  544Hz (100mS)/440Hz (400mS) – NF S 32-001 T 2 T 27
T 18660Hz 1.8sec on, 1.8sec off Intermittent T 2T 5
T 19  1.4KHz-1.6KHz 1s, 1.6KHz-1.4KHz 0.5s
-NFC48-265T 2T 5
T 20  660Hz Continuous T 2T 5
T 21  554Hz/440Hz @ 1Hz Alternating T 2T 5
T 22  544Hz @ 0.875 sec. Intermittent T 2T 5
T 23  800Hz @ 2Hz Intermittent T 6 T 5
T 24  800/1000Hz @ 50Hz Sweeping T 29 T 5
T 25  2400/2900Hz @ 50Hz Sweeping T 29 T 5
T 26  BellT 2 T 15
T 27  554Hz ContinuousT 26 T 5
T 28  440Hz Continuous T 2 T 5
T 29  800/1000Hz @ 7Hz Sweeping T 7T 5
T 30  300Hz Continuous T 2 T 5
T 31  660/1200Hz @ 1Hz Sweeping T 26 T 5
T 32  Two T chimeT 26 T 15
 Country specific or custom tone configurations and alarm frequencies are available upon request.     

Copyright © 2019 Marin Supply. All rights reserved.
Forretningssystem og netthandel er levert av MultiCase™ Norge AS