2000327
10303
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
Totalt antall treff:
|
Antall artikler funnet:
|
Handlevogn
Handlevognen er tom.
Ex 90° RotatingAdaptor RAMF900BF/M25/M25
IP66 & IP68@100m/7d Ex-db-eb-ta-nr
|
|
PRODUCT TYPE RA**90
Metallic 90 Degree Rotating Adaptors and Reducers
Ex db : Ex eb : Ex nR : Ex ta : IP66 : IP68 |
“RA**90” Series Dual Certified Right Angled Rotating Adaptors are designed to protect cables when installed in confined spaces where the cable may otherwise be subject to excessive bending and / or stress. The series is available with Male/Male, Male/Female or Female/Female connection threads. They are approved for Ex db, Ex eb, Ex ta and Ex nR methods of explosion protection whilst maintaining IP66, IP68 for IEC type applications.
IP Rating: | IP66 & IP68 (100 metres for 7 days) |
| |
OperatingTemperature: | Washer - None -60°C to +135°C |
| Washer - Fibre -40°C to +95°C |
| Washer - Nylon -40°C to +135°C |
| Washer - PTFE -60°C to +135°C |
| |
Materials: | Brass or Stainless Steel |
| |
Plating: | Electroless Nickel |
| | | | | |
Part Numbers: | RA | MF90 | 0 | B | F |
| | MM90 | | S | |
| | FF90 | | | |
Example Part Numbering: | RA MM 900 BF / NP / M20 / M20 |
(See below for details) | |
| RA | Rotating Thread converting Adaptor/Reducer |
| MF90 | Male / Female (MF90) |
| | Male / Male (MM90) |
| | Female/Female (FF90) |
| 0 | No IP O-ring |
| B | (B) Brass |
| | (S) Stainless Steel |
| F | Ex db & Ex eb certification |
| | |
Options: | K, V or H | Locknut & Nylon (K) - Fibre (V) - |
| | or PTFE (H) IP Washer |
Options: | S | Including Serrated Washer |
Options: | 1 | Quantity per kit |
Options: | NP | (NP) Nickel Plated |
| | |
| M20 | Male Entry Thread |
| M20 | Female Entry Thread |
Optional Accessories:
IP Washers: | (N) Nylon (A C N S W) |
| (J) Fibre (A C F S W) |
| (Z) PTFE (A C P S W) |
| |
Earth tag: | (T) Brass (A C B E T) - St-Steel (A C S E T) |
| |
Locknut: | (L) Brass (A C B L N) - St-Steel (A C S L N) |
| |
Serrated Washer: | (S) Stainless Steel (A C S S W) |
| |
Compliance Standard: |
|
EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 60079-31 IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 60079-15, IEC 60079-31 & IEC 60529 |
ATEX: | I M2 II 1D 2G Ex db I Mb / Ex db IIC Gb / Ex eb I Mb |
| / Ex eb IIC Gb / Ex ta IIIC Da / II 3G Ex nR IIC Gc |
IECEx: | Ex db I Mb / Ex db IIC Gb / Ex eb I Mb / Ex eb IIC Gb |
| / Ex ta IIIC Da / Ex nR IIC Gc |
| |
ATEX: | CML 19ATEX1330X & CML 19ATEX4331X |
IECEx: | IECEx CML 19.0101X |
| |
Male and Female Thread References and Size information can be found on page 40 of our product catalogue.
Adaptor and Reducer size information is available on request.
Male and female threads are manufactured in accordance with:-
• ISO Metric threads to ISO 965-1, ISO 965-3, BS3643 and IEC 60423
• NPT and NPS threads are in accordance to ANSI B1.20.1
• PG threads to DIN40430
• ET threads to Imperial Conduit BS31
• ISO Pipe Parallel to ISO 228 and BS2779 (BSPP, G, R, PF & Tpy 6)
• ISO Pipe Taper to ISO 7-1 and BS21 (BSPT, Gc, Gk, Rk, PT & Kmpy 6)