1946
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.

 

Ex Cable Gland A2LF-NP/20/M20 NP-Brass

IP66&IP68@25m EExdeIIC oø 9,4-14,0mm

Varenr:
A2LFNP20M20
A2LFNP20M20 Peppers                                  A2LF/NP/20/M20 Ex Cable Gland A2LF-NP/20/M20 NP-Brass IP66&IP68@25m EExdeIIC oø 9,4-14,0mm
A2LFNP20M20 Peppers                                  A2LF/NP/20/M20 Ex Cable Gland A2LF-NP/20/M20 NP-Brass IP66&IP68@25m EExdeIIC oø 9,4-14,0mm
Cable Gland Type A2LF/NP/20/M20
 
Nickel Plated (NP) Brass CZ121
Outer Sheath Cable Diameter 9,4 mm to 14,0 mm
 
A2LF type glands provide a single pull resistant seal on the outer sheath of any cable. A2LF type glands maintain Flameproof Exd and Increased Safety Exe methods of explosion protection, IP66 Et. IP68 to 25 metres. An integral '0' ring entry thread seal is fitted to metric versions as standard.
 
COMPLIANCE STANDARD:
EN 60079-0, EN 60079-1, EN 60079-7, EN 61241-0, EN 61241-1, IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0 Et IEC 61241-1
 
CERTIFICATION:
ATEX II 2 GD, E Exd IIC / E Exe II
GOST R-Exd IIC/Exe II
CSA Exd IIC/Exe II 4X
IECEx Exd IIC / Exe II
NEPSI Exd IIC / Exe II
 
CERTIFICATE:
SIRA 01ATEX1272X - Ex Notified Body No. 0518
POCC GB MJ114.B00030
CSA 1356011
IECEx SIR 07.0096X
NEPSI GYJO6186X
 
APPLICATION:
EExd Equipment
A2LF type glands will only maintain Flameproof Exd integrity when used with cable that is substantially round and compact with extruded bedding. The cable shall be deemed to be effectively filled. Ref: IEC60079-14:2002 Section 10.4.2
 
INGRESS PROTECTION (IP):
 
IP66 and IP68 ® 25 metres, Enclosure Type 4X
 
MATERIALS:
Brass CZ121 (A2LF)
316 Stainless Steel (A2LSF)
Aluminium Alloy (A2LAF)
 
Outer sheath seal material:
Standard (A2L) Neoprene, black. Option (A3L) Silicone, white. Integral entry thread seal: Nitrile is supplied with neoprene outer seal version. Silicone is supplied with silicone outer seal version
 
VARIATIONS:
For lead sheath cables the gland is fitted with a metallic continuity washer: Brass (A4LF); 316 Stainless Steel (A4LSF)
 
THREADS OPTIONS:
ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel); PG
 
SEALS OPTIONS:
Extended operating temperature -60°C to +180°C, halogen free versions: Brass (A3LF); 316 Stainless Steel (A3LSF)
 
PLATING OPTIONS:
Zinc (ZP); Nickel (NP); Tin (TP); Electroless Nickel (EN)
 
OPERATING TEMPERATURES:
Standard Seals -20°C to +85°C
Silicone Seals -60°C to +180°C
 
ACCESSORIES:
Locknut - Brass (ACBLN); 316 Stainless Steel (ACSLN); Aluminium (ACALN)
Earth Tag - Brass (ACBET), 316 Stainless Steel (ACSET); Aluminium (ACAET)
IP Washer - Nylon (ACNSW); Red Fibre (ACFSW)
Serrated Lock Washer - 316 Stainless Steel (ACSSW), Galvanised Steel (ACGSW)
Shroud - PVC (ACSPVC); PCP (ACSPCP); Low Smoke Zero Halogen (ACSSIO)
 
Gland and accessory kits:
CK1 - includes gland, locknut, integral IP '0' ring and PVC shroud
K1 - includes gland, locknut, integral IP '0' ring and PCP shroud
 
Note: Glands with non metric threads are supplied with flat IP washers.
 
NOTES:
• Suitable only for fixed installations. The cable must be clamped near the gland to prevent pulling and twisting
• Gland Size does not necessarily equate to the entry thread size
• Integral entry thread seal option is not available for glands with tapered entry threads. IP washers can be supplied if required
• Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions
• Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch
• For Flameproof Exd applications the female thread into which the gland is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads
• Where A2LF type glands are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system
• The user should seek expert advice if intending to combine flammable gases and combustible dusts in one environment/ installation
• Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full
 
------------------------------------------------
int.ref.#: 116-6571-070.2020       


Copyright © 2014 Marin Supply. All rights reserved.
Webshopen er levert av MultiCase™ Norge AS
3.13.1.16